-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Creality Ender 5 S1 3D Printer
Features:
- Stable Frame Underpins Quality: All-metal cube frame with thick linear shafts, and silicone bed mounts. It ensures a 100% success rate at 250mm/s high speed and 0.2mm layer height.
- Dual-gear Direct Extruder: Metal design featuring dual gears of a 1:3.5 gear ratio. It delivers a strong and uniform 80N extrusion and extrusion force. Able to Print ABS also.
-
16-point Auto-Leveling: Level the bed by CR Touch 16-point auto-leveling and auxiliary leveling, or offset the Z-axis height at 0.01mm accuracy. Get the perfect first layer.
-
Straightforward Touch Screen: 4.3-inch touch screen featuring a wide viewing angle, and a tabbed user interface. A temperature PID control page is also added for easy adjustment.
Filament Runout Sensor Yes Rated Voltage 100-120V~, 200-240V~, 50/60Hz Rated Power 350W File Formats STL, OBJ, AMF Supported Filaments PLA, PETG, ABS, TPU, PC, ASA, HIPS File Transfer Memory card, USB Type-C cable Slicing Software Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D ₹30,202.00Creality Ender 5 S1 3D Printer
₹30,202.00 -
Anycubic Vyper 3D Printer
Features Of Anycubic Vyper 3D Printer:
- Auto Leveling: Enjoy hassle-free printing with the intelligent leveling system that automatically adjusts the hotbed for precise prints.
- High-precision double screw: Experience stable operation and minimal zeroing error with the machine’s synchronized double screw mechanism.
- Double photoelectric limit: Achieve accurate Z-axis zeroing with automatic compensation for hotbed differences.
- Spring steel magnetic platform: Easily remove models with the scratch-resistant coating and compatibility with various filaments.
- Dual cooling fans: Rapidly cool down models with the double fan two-way heat dissipation system, enabling faster printing speeds.
- Double-gear extrusion system: Reduce filament tangle and optimize print paths for strong extrusion force and compatibility with different filaments.
- 4.3″ large-size touch screen: Enjoy a smooth and user-friendly operation with the new UI interface and language options.
- Small body and big size: With a print size of 245 * 245 * 260mm, unleash your creativity with ample space for larger prints.
- A brand-new core: Benefit from high-speed computing, silent printing, and enhanced performance with the M3 chip and 32-bit main frequency.
₹33,650.00Anycubic Vyper 3D Printer
₹33,650.00 -
ARF Quadcopter Advanced Combo Kit
Following two motors along with the propellers are included in this combo pack,
-
EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original)
This ARF Quadcopter EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is motor and propeller combo for use in multi-copters such as tri, quad, hex, and octo, with the ability of transient response and stability. High efficiency with better materials. With prop adapter which is specially made to adjust the rotation of CCW (counter-clockwise) propellers. The ARF Quadcopter EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is easy to install with high quality and durability in use.
- EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original)
The EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original) is same as the above motor but used to spin the propellers in the clockwise direction.
This EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is motor and propeller combo for use in multi-copters such as tri, quad, hex, and octo, with the ability of transient response and stability. High efficiency with better materials.
With prop adapter which is specially made to adjust the rotation of CW (clockwise) propellers. The EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is easy to install with high quality and durability in use.
Emax BLHeli Series 30A ESC with Oneshot (Original)
The electronic speed control, or ESC, is what tells the motors how fast to spin at any given time. You need four ESCs for a quadcopter, one connected to each motor. The ESCs are then connected directly to the battery. EMAX BLHELI SERIES 30A ESC is a brushless dc motor speed controller.
The low output resistance greatly enhances the power stability, and this will improve the great battery life. The EMAX BLHELI SERIES 30A ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for last 10 seconds only.
Specification and Features :
- Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
- Materials: glass fiber + polyamide-nylon
- Frame Weight: 280g.
- Height: 55mm
- Colored arms for orientation to keep you flying in the right direction.
- Power distribution board included in this item(inbuilt PCB).
- Pre-threaded brass sleeves for all frame bolts.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
-
EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original)
- Brand Name: Emax
- Item Name: Emax MT2213 935KV brushless motor
- KV: 920 KV
- ESC: 18A
- Thrust: 860G
- Propeller: 8″-10″
- Diameter: 28 mm
- Length: 39.5 mm
- Weight: 53 gm
-
EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original)
- Brand Name: Emax
- Item Name: Emax MT2213 935KV brushless motor
- KV: 920 KV
- ESC: 18A
- Thrust: 860G
- Propeller: 8″-10″
- Diameter: 28 mm
- Length: 39.5 mm
- Weight: 53 gm
-
Emax BLHeli Series 30A ESC with Oneshot (Original)
- Constant Current : 30A
- Burst Current: 40A for 10 sec.
- Battery required : 2-4 S (Orange battery)
- BEC Voltage : 5V / 2A
- Size : 52 x 26 x 7 mm.
- Weight: 28 gm
-
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
- Processor
- 32bit STM32F427 Cortex M4 core with FPU.
- 168 MHz.
- 128 KB RAM.
- 2 MB Flash.
- 32-bit STM32F103 failsafe co-processor.
- Sensors
- ST Micro L3GD20H 16 bit gyroscope.
- ST Micro X4HBA 303H 14 bit accelerometer/magnetometer.
- Invensense MPU 6000 3-axis accelerometer/gyroscope.
- MEAS MS5607 barometer.
- Interfaces
- 5x UART (serial ports), one high-power capable, 2x with HW flow control.
- 2x CAN (one with an internal 3.3V transceiver, one on expansion connector).
- Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.
- Futaba S.BUS® compatible input and output.
- PPM sum signal input.
- RSSI (PWM or voltage) input.
- Processor
-
Ublox NEO-M8N High Precision GPS Built-in Compass for APM, AMP2.6, APM 2.8 and Pixhawk 2.4.6, Pixhawk 2.4.8
- Navigation update rate up to 10 Hz
- Rechargeable 3V lithium backup battery
- Low noise 3.3V regulator
- Power and fix indicator LEDs
- Receiver type 72-channel u-box M8 engine
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
- SBAS L1 C/A: WAAS, EGNOS, MSAS
- Galileo-ready E1B/C (NEO-M8N)
- Nav. update rate1 Single GNSS: up to 18 HZ
- Concurrent GNSS: up to 10 Hz
- Position accuracy2 2.0 m CEP
- Acquisition2 Cold start: 26 s
- Aided starts: 2 s
- Reacquisition: 1.5 s
-
UNIVERSAL GPS FOLDING ANTENNA BASE SET/BLACK
- Material: CNC Aluminum alloy, carbon glass fiber rod
- Mounting rod diameter: 4mm
- length of rod: 14 cm.
- GPS plate diameter: 40 mm.
- Base plate diameter: 35 mm
- Mounting hole spacing: 16-35mm
- Weight: 20g
-
Flysky FS-i6X 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
- Channel : 6-10 (Default 6)
- Model Type : Fixed-Wing/Glider/Helicopter
- RF Range : 2.408-2.475GHz
- RF Power : < 20dBm
- RF Channel : 135
- Bandwidth : 500KHz
- 2.4GHz System : AFHDS 2A / AFDHS
- Modulation Type : GFSK
- Stick Resolution : 4096
- Low Voltage Warning : < 4.2V
- DSC port : PS/2 Port PPM
- Chargeable : No
- Antenna Length : 26mm (Dual Antenna)
- Weight : 392g
- Power : 6V DC 1.5A
- Orange 5200mAh 3S 40C/80C Lithium polymer battery Pack (LiPo)
- Model No: Orange 5200mAh 40C 3S1P
- Capacity : 5200mAh
- Weight : 360.0g
- Voltage : 11.1V
- Dimensions : 28x44x137(mm )
- Max Continuous Discharge : 40C(208.0A)
- Balance Plug : JST-XH
- Max Burst Discharge : 80C(416.0A)
- Discharge Plug : XT-60
- Charge Rate : 1-3C Recommended, 5C Max
- Lipo Voltage Checker 1-8S
- Input: 1-8S
- Battery type: Lipo/LiFe/Li-ion
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
- XT60 Male w/ 14AWG Silicon Wire 10cm (1pcs/bag)
- Connector Type: XT60 Male
- Material of Connector: High-Temp nylon
- Length: 10 cm.
- High-Quality Connector
- Designed for heavy duty
- High Power Application
- SafeConnect Flat 15CM 22AWG Servo Lead Extension (Futaba) Cable
- High-Quality cable
- One male and one female connector.
- Flat 15 cm Servo Lead Extention (Futaba)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
₹36,000.00ARF Quadcopter Advanced Combo Kit
₹36,000.00 -
-
Anycubic Photon Mono SE 3D Printer
Features –
- Fast Printing, Saving Time — ANYCUBIC Photon Mono SE achieves fast printing, each layer of exposure can cure the resin in only 1 second, and the printing speed is MAX 80mm/h, which is 4 times that of ordinary color screens, which greatly improves the printing efficiency and saves time printing More models. The 6.08-inch 2K monochrome LCD has a longer service life and can print for more than 2000 hours.
- High Printing Accuracy, High Stability — Photon monose adopts 2k 6.08 inch black and white screen, 2560 * 1620 (2K) high resolution brings high precision printing, high light transmittance, and Z axis adopts double linear guide + screw motor +The combination of anti-backlash nut to improve the stability of the Z axis, so that the printing details can be vividly displayed, suitable for printing microcosms, with surprising fineness.
- WIFI Control, One-key Leveling — Download and use the Anycubic 3D application control to easily realize remote control of printing operations, real-time monitoring of printing progress, and adjustment of printing parameters at any time. The Anycubic Photon Mono SE 3D Printer is a pre-assembled printer, which can be assembled quickly and leveled easily. Just reset to zero → lock the platform, and leveling can be completed in two simple steps.
- Metal Frame, Sturdy and Durable — The all-metal one-piece housing and CNC machined aluminum body enable Photon Mono Se to reduce resonance, make printing more stable and improve printing accuracy. The printing platform is designed with a drawing process, which can enhance the adhesion, make it more stable during the printing process and eliminate the print layer pattern.
- Powerful Heat Dissipation System — Anycubic Photon Mono SE 3D Printer monose has a unique ultraviolet heat dissipation channel, effective cooling, helping to improve printing quality and service life. The print size is 130 x 78 x 160mm, which fits the size of various print models.
₹36,478.00Anycubic Photon Mono SE 3D Printer
₹36,478.00 -
ATL Package 3 (Electronics and Mechanical Prototyping Tools)
The Atal Tinkering Lab (ATL) initiative is aimed at enhancing the Indian Education System. It is converting thoughts to reality, where the young children (max 12 years of age) are being introduced to the world of technological innovation. ATL made to experience totally different microenvironments in Indian schools. This is allowing the children to work around their area of interest without having a fixed syllabus.
₹43,000.00 -
Creality CR-200B Pro 3D Printer
Extruder Temp. ≤ 260℃ Filament Diameter (mm) 1.75 File Format STL/OBJ/AMF Nozzle Diameter (mm) 0.4 Dimensions in mm (LxWxH) 435x411x503mm Weight (Kg) 16.5kg Accuracy ±0.1mm Display Size (inch) 4.3 inch touch screen Motherboards support Integrated 32-bit silent mainboard Camera Built-in 1080P HD Camera Features-
- High Precision Printing: Achieve intricate details and smooth finishes with the CR-200B Pro’s precise printing capabilities.
- Large Build Volume: Create bigger projects effortlessly thanks to the generous build area, expanding your creative horizons.
- User-Friendly Interface: Intuitive touchscreen interface and easy-to-navigate menus make printing hassle-free for beginners and experts.
- Quiet Operation: Enjoy a peaceful environment with the printer’s quiet stepper motor drivers, ideal for home or office settings.
- Filament Detection: Automatic filament detection pauses printing when material runs out, preventing incomplete projects.
- Resume Printing Function: Power outage? No worries. The printer resumes from where it left off, saving time and materials.
- Sturdy Construction: The robust frame ensures stability during printing, enhancing the quality of your 3D prints.
- Versatile Filament Compatibility: Print with a wide range of filaments, from PLA to flexible materials, for diverse project possibilities.
- Efficient Cooling System: Improved cooling mechanisms prevent overheating, maintaining consistent print quality.
- Wi-Fi Connectivity: Print remotely and conveniently manage projects using wireless connectivity.
₹44,020.00Creality CR-200B Pro 3D Printer
₹44,020.00 -
Creality Ender 5 Plus 3D Printer
Features:
- Cubic-like Frame designed
- Ultra Large Printing Format
- Stable Printing
- Filament Sensor
- Resume printing Function
₹47,576.00Creality Ender 5 Plus 3D Printer
₹47,576.00 -
Creality High Speed K1 3D Printer
Features:
- Blazing Speed: Print at a stunning maximum speed of 600 mm/s for quicker results.
- Hands-free Auto Leveling: Effortlessly ensure perfect prints every time.
- Precision Engineering: high-quality components for accurate and detailed creations
- Spacious Build Area: Accommodate larger projects with the generous printing space.
- Intuitive Interface: User-friendly controls make operation seamless.
- Quiet Printing: Advanced noise reduction technology for a quieter workspace
- Wide Compatibility: Print using various filament types and 3D design formats.
- Reliable Performance: Trust in the durability and consistency of Creality technology.
₹49,219.00Creality High Speed K1 3D Printer
₹49,219.00 -
Flashforge Adventure 3 FDM- 3D Printer
Flashforge Adventure 3 Features:
Screen 2.8-inch touch screen Input 100-240 VAC,47-63Hz Internal Storage 8 GB Data Transmission USB stick,Wi-Fi,Ethernet,FlashCloud,Polar Cloud Software FlashPrint Software Input 3MF/STL/OBJ/JPG/JPEG files Camera 1 Filter Fan External ₹54,000.00Flashforge Adventure 3 FDM- 3D Printer
₹54,000.00 -
Original Prusa Mini+ 3D Printer Kit
Features:
- Silent Trinamic 2209 stepper drivers
- 3 thermistors, fan RPM sensors
- A Bowden system with3:1 gearing
- Super PINDA probe – no temperature drift
- Fast preheat: PLA 1 min / ASA 3 min
- Sensor less homing for X and Y axes
- 2.8″ graphic 65k color screen with G-Code preview
- Prusament PLA sample weight: ~2×25 g
₹58,644.00Original Prusa Mini+ 3D Printer Kit
₹58,644.00 -
Flashforge Adventurer 4
- Heated Build Plate Temperature: Up to 110°C (230°F) – Auto-Leveling Platform with An Aluminum Base
- Print Volume: 220 x 200 x 250 MM (8.7 x 7.9 x 9.8 IN) – Magnetic Removable Build Platform
- Print Precision: ±0.1 MM (Tested with 100 MM Cube) – Quick Release Nozzle with Ultra-Fast Heat up
- Nozzle Diameter: 0.4 MM (Default); 0.6 MM & 0.3 MM (Optional) – Compatible with PLA, PETG, ABS, PC, PLA-CF, PETG-CF / Compatible with FlashForge 0.3 MM, 0.4 MM, and 0.6 MM Nozzles
- Fully Enclosed Printing Chamber & HEPA 13H Air Filter System Manage series of Adventurer 4 3D Printers remotely for ultra-efficiency with high output, scale-up, or do your production at will
₹64,547.00Flashforge Adventurer 4
₹64,547.00 -
Creality CR-30 3D Printer
Features:
- Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, the Creality CR-30 enables you to print “infinitely” on the Z-axis for large prints or production lines producing smaller parts, making it a highly productive mini-factory right on your desk.
- Rolling Conveyor Belt: The wear-resistant conveyor belt on the Creality CR-30 features excellent layer adhesion. In addition, prints will fall off automatically when they reach the belt ends, making it a smoother workflow for you to print continuously.
- Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing experience.
- Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force and allows for large filament spools, combined with the 45 degrees slanting nozzle, the Creality CR-30 is capable of 200 hours of continuous printing.
- Exclusive 3DPrintMill Slicer: Specially designed slicer Creality Belt is available for download. It prioritizes ease of use and thus makes it easier for you to explore this brand-new belt printer.
- Supporting Material – PLA, TPU & PETG
₹70,473.00Creality CR-30 3D Printer
₹70,473.00
