-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST)
-
STANLEY 84-214-22 130mm/5.25” Wire Stripper (Black and Yellow)
FEATURES & BENEFITS
- Adjustable slide stop and hole designed for bending and looping wire
- Oil-resistant dipped handle allows for a comfortable grip
- Meets ANSI specifications
₹250.00 (excl. GST)STANLEY 84-214-22 130mm/5.25” Wire Stripper (Black and Yellow)
₹250.00 (excl. GST) -
Stanley Adjustable Wrench
Features
- Forged chrome vanadium steel construction for improved rigidity and durability providing long service life
- Black phosphate finish provides superb corrosion and abrasion resistance and improved grip for confident operation
- Etched measurement markings on jaw opening in both metric and SAE for convenient identification of fastener sizing
₹220.00 (excl. GST)Stanley Adjustable Wrench
₹220.00 (excl. GST) -
STANLEY 66-052 Bi Material Handle Precision Screwdriver Set (6 Piece)
Bi-material handle design
Tips hardened to 53 HRC
Chrome vanadium steel blade with black oxide finish
Overall length 110mm
Set contains Philips No. 0,1, Slotted tip 1.4, 2.0, 2.4, 3.0mm₹550.00 (excl. GST)STANLEY 66-052 Bi Material Handle Precision Screwdriver Set (6 Piece)
₹550.00 (excl. GST) -
Wood Handle Ball Pen Hammer
- 24 torque stabilizing bars
- AntiVibe patented tuning fork
- Bright colour accents, easy to find on work site
- Graphite core shaft for maximum strength
- One-piece forged construction for strength and durability
- Patented Anti-Vibe™ technology reduces vibration transmitted to wrist and elbow
- Patented head to handle assembly for improved safety
- Precision balanced
₹350.00 (excl. GST)Wood Handle Ball Pen Hammer
₹350.00 (excl. GST) -
84-096-23 127mm-5 Needle Nose Miniature Plier
- Long tempered jaws for working in hard to reach areas
- Forged steel construction
- Rust resistant finish
- Double dipped handle for comfort | Meets or exceeds ANSI standards
₹400.00 (excl. GST)84-096-23 127mm-5 Needle Nose Miniature Plier
₹400.00 (excl. GST) -
Stanley Bent Nose Pliers 200mm
The angled nose is capable of gripping and maneuvering objects in obstructed situations
Bent nose plier 6”, 8” carbon steel polished₹300.00 (excl. GST)Stanley Bent Nose Pliers 200mm
₹300.00 (excl. GST) -
Stanley 84-214-22 Wire Stripper 130mm
- Size: 130mm / 5 1/4- Inch
- Convenient hole for looping or bending wire
- Ideal for cutting, stripping speaker wire, appliance cords, etc
- Slide adjust for various gauge wire
₹200.00 (excl. GST)Stanley 84-214-22 Wire Stripper 130mm
₹200.00 (excl. GST) -
Stanley PLIER Long Nose, 203mm-8
- Features – Forged Steel Construction, Double dipped handles, Rust Resistant Finish
- Specifications – Part No. 84-102, Size: 203mm / 8″ Long Nose Plier
- Applications – Electric and Household applications
₹400.00 (excl. GST)Stanley PLIER Long Nose, 203mm-8
₹400.00 (excl. GST) -
External Nose Circlip Plier – 5 inch -84-332-23
- Limited lifetime warranty offered on the product
- This product comes in a proper packaging
- The first clamp fine polishing and processing blackening, good looking
₹350.00 (excl. GST)External Nose Circlip Plier – 5 inch -84-332-23
₹350.00 (excl. GST) -
Junior Hacksaw Blades – 12 inch
A pack of ten 150mm blades made from a strong but flexible carbon steel to ensure extra long life.
₹800.00 (excl. GST)Junior Hacksaw Blades – 12 inch
₹800.00 (excl. GST) -
Steel Frame Hacksaw -15-166 305mm/12”
- Depth of Throat: 220mm/8” 3/4”.Blade Size: 254mm / 12-Inch
- Structurally designed for maximum strength and durability
- Designed to cut metal and plastic in hard to reach places
- Ergonomically designed grip with thumb rest for maximum comfort
- Back blade stop for safe handling and use
₹700.00 (excl. GST)Steel Frame Hacksaw -15-166 305mm/12”
₹700.00 (excl. GST)
