-
RF Wireless Transmitter Receiver Module (Green)
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 315MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
-
NodeMcu ESP8266 Based Wireless Development Module for IOT
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
-
Esp8266-12E WIFI Module
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
₹150.00 (excl. GST)Esp8266-12E WIFI Module
₹150.00 (excl. GST) -
ESP-12F ESP8266 Wifi IOT Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
₹115.00 (excl. GST)ESP-12F ESP8266 Wifi IOT Module
₹115.00 (excl. GST) -
SMPS Adaptor of 24V 2.5Amps
- Material: Plastic
- Colour: Black
- Dimensions (L x B x H): 6.5 cm x 3.5 cm x 10 cm
- Weight: 120 g
- Package Contents: 1 RO Water Purifier SMPS
- Warranty: 6 Months Seller Warranty on Manufacturing Defects
- Care Instructions: Check specifications before use
₹610.00 (excl. GST)SMPS Adaptor of 24V 2.5Amps
₹610.00 (excl. GST) -
Prototype PCB Vero Perforated Board
Size 4 x 4 inch Voltage 12 V DC Operating Temperature -20 to 50 Degree C Rated Pressure 15 kPA -
25W Soldering Rod Iron
- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
-
Servo Motor S3003
Features:
SMT Contruction Surface Mount Technology improves reliability in applications where there is vibration.
Through-the-hole Circuit Board Plating Eliminates the need for wires or leads.
Heavy Duty Output Shaft Designed not to break, and offers versatility when installing the servo horn.
Nylon gears.₹250.00 (excl. GST)Servo Motor S3003
₹250.00 (excl. GST) -
Servo Motor MG995 Metal Gear 180 Degree
- Standard Mini Micro Servo Gear
- Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS.
- Stable and Shock Proof
- Connector Wire Length 300mm
- Power Supply: Through External Adapter
-
Quadcopter Drone DIY Kit – V1
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
- Easy assembly.
₹10,500.00 (excl. GST)Quadcopter Drone DIY Kit – V1
₹10,500.00 (excl. GST) -
DC L-Shaped BO Motor for Smart Car Robot
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.8 Kgcm
-
DC Geared Motor – 12V (10 to 1000 RPM)
- DC supply: 4 to 12V
- Total length: 46mm
- Motor diameter: 36mm
- Motor length: 25mm
- Brush type: Precious metal
- Gear head diameter: 37mm
- Gear head length: 21mm
- Output shaft: Centred
- Shaft diameter: 6mm
- Shaft length: 22mm
- Gear assembly: Spur
- Same size motor available in various RPM
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale