No products in the cart.
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
- “Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3” already exists in your wishlist
CA3130EZ CMOS Op-Amp IC DIP-8 Package
Features
- MOSFET Input Stage Provides: – Very High ZI = 1.5 T (1.5 x 1012) (Typ) – Very Low II 5pA (Typ) at 15V Operation = 2pA (Typ) at 5V Operation
- Ideal for Single-Supply Applications
- Common-Mode Input-Voltage Range Includes Negative Supply Rail; Input Terminals can be Swung 0.5V Below Negative Supply Rail
- CMOS Output Stage Permits Signal Swing to Either (or both) Supply Rails
- Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
- Frequency Generator/Distorter
- Mobile jammers
- Voltage follower circuits
- DAC circuits
- Peak Signal/Noise detectors
- Oscillator circuits
Physical Attributes
- Length * Width * Height (mm): 9 x 7 x 7
- Weight (gm) : 0.2
₹35.00 (Price is Exclusive of GST)CA3130EZ CMOS Op-Amp IC DIP-8 Package
₹35.00 (Price is Exclusive of GST)- ₹25.00 (Price is Exclusive of GST)
22E 2w Carbon Film Resistor – Pack of 5
₹25.00 (Price is Exclusive of GST) 270k Ohm Resistors, 1/4 Watt, 5% (Pack of 5)
Features-
Resistance: 270K Ohm,
Power Rating: 1/4Watt,
Approximate Maximum Current: 1.1mA
₹5.00₹10.00(Price is Exclusive of GST)270k Ohm Resistors, 1/4 Watt, 5% (Pack of 5)
₹5.00₹10.00(Price is Exclusive of GST)170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
Features :
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Color: Green, Yellow, Black.
₹57.00 (Price is Exclusive of GST)170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
₹57.00 (Price is Exclusive of GST)Motor Driver Module TA6586 Based
Features:
- Heavy-duty screw terminal for the input.
- Can be connected directly to the 433MHz receiver output.
- Can drive up to 5A of current.
- Drives 2 motors.
₹165.00 (Price is Exclusive of GST)Motor Driver Module TA6586 Based
₹165.00 (Price is Exclusive of GST)Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
Product:5W 220 Ohm,
cement resistorPower:5W
Resistance:5 Ohm
Body material:Cement
Tolerance: +/-5%
Color: White
Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H)
Lead length(approx. ):0.8inch/21mm,
Lead diameter(approx. ): 0.026 inch/0.65mmPer Piece,
Weight(approx. ):0.18oz/5g
PACKAGE CONTENT: 5 x Cement Resistors
₹55.00 (Price is Exclusive of GST)Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
₹55.00 (Price is Exclusive of GST)- ₹25.00 (Price is Exclusive of GST)
22E 2w Carbon Film Resistor – Pack of 5
₹25.00 (Price is Exclusive of GST) 3K3 10W Resistor 5% – (Pack of 5)
Specification
- Tolerance – 5%
- Power Rating – 3 W
- Resistance – 1 Ohm / 1R
- Resistor Type: Wire Wound
₹36.00 (Price is Exclusive of GST)3K3 10W Resistor 5% – (Pack of 5)
₹36.00 (Price is Exclusive of GST)1K ohm Resistor -2 Watt (5 Pieces Pack)
Features
Electronics Components Passive Components Electronics Components Type Resistors Resistor Type Carbon Film Resistor Resistance Value 1 Ohms Power Rating of Resistor 2 Watt Tolerance 5% ₹20.00 (Price is Exclusive of GST)1K ohm Resistor -2 Watt (5 Pieces Pack)
₹20.00 (Price is Exclusive of GST)6E8 ohm 5 Watt Wire Wound Resistor (Pack of 2)
Features/Specs:
- Resistor Value: 6.8 ohm
- Wattage: 5 Watt
- Type: Wire Wound
₹30.00 (Price is Exclusive of GST)6E8 ohm 5 Watt Wire Wound Resistor (Pack of 2)
₹30.00 (Price is Exclusive of GST)Original ARDUINO NANO 33 BLE Board (Without Header)
Bluetooth and BLE
The communications chipset on the Nano 33 BLE can be both a BLE and Bluetooth client and host device. Something pretty unique in the world of microcontroller platforms. If you want to see how easy it is to create a Bluetooth central or a peripheral device, explore the examples at our Arduino BLE library.
Features:
- 9 axis inertial sensor: what makes this board ideal for wearable devices
- humidity, and temperature sensor: to get highly accurate measurements of the environmental conditions
- barometric sensor: you could make a simple weather station
- microphone: to capture and analyze sound in real-time
₹1,592.00₹2,999.00(Price is Exclusive of GST)Original ARDUINO NANO 33 BLE Board (Without Header)
₹1,592.00₹2,999.00(Price is Exclusive of GST)- ₹10.00 (Price is Exclusive of GST)
3E9 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (Price is Exclusive of GST)
