-
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
3 Series 20A 18650
Specifications:
Battery : 3 CellOvercharge detection voltage (V) : 4.25±0.025
Discharge voltage range (V) : 2.3 ~ 3.0±0.05v
Continuous charge current (A) : 20
Operational Temperature (°C) : -40 ~ +50
Length (mm) : 59
Width (mm) : 20
Height (mm) : 4
Weight (gm) : 4
₹70.00 (Price is Exclusive of GST)3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
₹70.00 (Price is Exclusive of GST) -
TLP350 Logic IC Output Optocoupler
TLP350
Features
-
Peak output current : IO = ±2.5A (max)
-
Guaranteed performance over temperature : −40 to 100°C
-
Supply current : ICC = 2 mA (max)
-
Power supply voltage : VCC = 15 to 30 V
-
Threshold input current : IFLH = 5 mA (max)
-
Switching time (tpLH/tpHL) : 500 ns (max)
-
Common mode transient immunity : 15 kV/μs
-
Isolation voltage : 3750 Vrms
-
Operating frequency 50 kHz
-
Storage temperature range Tstg -55 to 125 °C
-
Lead soldering temperature (1 0 s) Tsol 260 °C
₹70.00 (Price is Exclusive of GST)TLP350 Logic IC Output Optocoupler
₹70.00 (Price is Exclusive of GST) -
-
TLP250H – Optocoupler : Toshiba – Transistor Inverter Photo Coupler [Original]
TLP250H
- Series: TLP250
- Product Type: Logic Output Optocouplers
- Output Type: Push-Pull
- Number of Channels: 1 Channel
- Isolation Voltage: 3750 Vrms
- Fall Time: 50 ns
- Propagation Delay – Max: 500 ns
- If – Forward Current: 20 mA
- Vf – Forward Voltage: 1.57 V
- Vr – Reverse Voltage: 5 V
- Pd – Power Dissipation: 260 mW
- Minimum Operating Temperature: -40°C
- Maximum Operating Temperature: +125°C
- Mounting Style: Through Hole
- Package/Case: DIP-8
₹70.00 (Price is Exclusive of GST)TLP250H – Optocoupler : Toshiba – Transistor Inverter Photo Coupler [Original]
₹70.00 (Price is Exclusive of GST) -
NE555 Delay Monostable Switch Module with Relay
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- Max. load: 2200W
₹70.00 (Price is Exclusive of GST)NE555 Delay Monostable Switch Module with Relay
₹70.00 (Price is Exclusive of GST) -
Array Network Resistors 10 PIN
- Longer working life
- Reduced maintenance cost
- Convenient operation
₹70.00 (Price is Exclusive of GST)Array Network Resistors 10 PIN
₹70.00 (Price is Exclusive of GST) -
L clamp for Johnson Gear Motor Mounting
- Material: Mild Steel
- Thickness: 1.5 mm
- Motor Mounting Hole: 3 mm
- Bracket Mounting Hole: 3 mm
- Weight: 18 gm (each)
₹69.00 (Price is Exclusive of GST)L clamp for Johnson Gear Motor Mounting
₹69.00 (Price is Exclusive of GST) -
6200ZZ Bearing 10x30x9 Shielded Miniature Ball Bearings (2pcs)
- Inside diameter: 10 mm.
- Outside diameter: 30 mm.
- Width: 9 mm.
- Weight: 118 gm. (Each has 29.5 gm).
₹68.00 (Price is Exclusive of GST)6200ZZ Bearing 10x30x9 Shielded Miniature Ball Bearings (2pcs)
₹68.00 (Price is Exclusive of GST) -
7812 Voltage Regulator IC
- Thermal Overload Protection
- Short-circuit Protection
- Output Transition SOA Protection
- 4% Output Voltage Tolerance
- Guaranteed in Extended Temperature Range
- Applications: Power Management
₹67.00 (Price is Exclusive of GST)7812 Voltage Regulator IC
₹67.00 (Price is Exclusive of GST) -
LM741 Op-amp IC
- Two Independent, High-Gain, Frequency Compensated Op-Amps
- Input Offset Voltage: 2 mV
- Input Offset Current: 20 nA
- Input Bias Current: 80 nA
- Supply Current: 1.7 mA
₹66.20 (Price is Exclusive of GST)LM741 Op-amp IC
₹66.20 (Price is Exclusive of GST) -
LM35 TO-92-3 Board Mount Temperature Sensors
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 5C accuracy guaranteeable (at +25C)
- Rated for full −55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 µA current drain
- Low self-heating, 0.08C in still air n Nonlinearity only ±1⁄4C typical
- Low impedance output, 0.1 for 1 mA load
₹66.20 (Price is Exclusive of GST)LM35 TO-92-3 Board Mount Temperature Sensors
₹66.20 (Price is Exclusive of GST) -
GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 400mm
- Belt Height: 1.52 mm
- Tooth Height: 0.76mm
- Shape: Closed Loop
₹66.00 (Price is Exclusive of GST)GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
₹66.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale













