-
NRF24L01 Wireless Transceiver Module-2.4GHz
The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation.
Features :
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications.
₹65.00 (Price is Exclusive of GST)NRF24L01 Wireless Transceiver Module-2.4GHz
₹65.00 (Price is Exclusive of GST) -
Desoldering Pump Tool
- One-handed solder sucker with powerful suction whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome
₹65.00 (Price is Exclusive of GST)Desoldering Pump Tool
₹65.00 (Price is Exclusive of GST) -
DC PWM Motor Speed Controller
- The maximum output power:30W
- Input supply voltage:1.8V-15VDC
- The Maximum continuous output current:2A
- Duty Cycle adjustable:0%-100%
₹65.00 (Price is Exclusive of GST)DC PWM Motor Speed Controller
₹65.00 (Price is Exclusive of GST) -
2 Channel 12V Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
₹65.00 (Price is Exclusive of GST)2 Channel 12V Relay Module with Optocoupler
₹65.00 (Price is Exclusive of GST) -
2 Channel 5V Relay Module
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
₹65.00 (Price is Exclusive of GST)2 Channel 5V Relay Module
₹65.00 (Price is Exclusive of GST) -
Wire Cutter and Stripper
- Flawless Finish
- Optimum Strength
- Best Quality
- Cutting range of wire 0.5mm to 2.5mm & 6mm
- Also Suitable for Electronic, Aviation &Â Automobile sectors
₹65.00 (Price is Exclusive of GST)Wire Cutter and Stripper
₹65.00 (Price is Exclusive of GST) -
Wire Clipper Nipper
Suitable for dressing components on printed circuit boards. Handles made out of ABS plastics. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip.
₹65.00 (Price is Exclusive of GST)Wire Clipper Nipper
₹65.00 (Price is Exclusive of GST) -
KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
Features :
- Durable with high precision
- Can withstand great weight
- The angle between the inner bearing and the outer fixing ring is adjustable
- Easy to install
₹62.90 (Price is Exclusive of GST)KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
₹62.90 (Price is Exclusive of GST) -
₹62.00 (Price is Exclusive of GST)3-Cell 18650 Battery Holder Series-Parallel
₹62.00 (Price is Exclusive of GST) -
LM2596 DC Step Down Buck Converter Power Supply Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹62.00 (Price is Exclusive of GST)LM2596 DC Step Down Buck Converter Power Supply Module
₹62.00 (Price is Exclusive of GST) -
Orange A Grade IFR14430 3.2V 400mAh 3C LiFePO4 Battery
- Shape:Â Cylindrical Battery
- Battery Type: LiFePO4 Battery
- High performance and capacity
- Flat top to suit many devices fitting
- Suitable for portable devices
₹61.00 (Price is Exclusive of GST)Orange A Grade IFR14430 3.2V 400mAh 3C LiFePO4 Battery
₹61.00 (Price is Exclusive of GST) -
M4 x 20mm CHHD Bolt and Nut Set-20Pcs.
M4 x 20mm
- Type: M4 (4.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 20 sets.
- Nut Type: Hex
₹61.00 (Price is Exclusive of GST)M4 x 20mm CHHD Bolt and Nut Set-20Pcs.
₹61.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
