-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
3296W 1k Ohm Trimpot Trimmer Potentiometer
Specification
- Series: 3296
- Resistance Tolerance : 10%
- Mounting Style: PCB Mount
- Adjustment: Top Slot
- Number of Turns: Multiturn
₹12.00 -
PCB Drill bit
Drill bit Applications:
- Drilling PCBs
- Drilling ornaments
- Drilling thin Aluminium plates
Drill bit specification:
- 0.8mm diameter
- High quality stainless steel
- Long term durability
- Good for though surfaces
₹12.00PCB Drill bit
₹12.00 -
Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
Timing Pulley
- Material: Steel
- Length of Allen Key: 48 mm
- Width of Allen Key: 1.4 mm
- Inner Diameter of grub: 2 mm
- Outer Diameter of Grub: 3.8 mm
₹12.00 -
100nF 1206 Surface Mount Multilayer Ceramic Capacitor(Pack of 3)
Features:
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen-free compliant
₹13.00 -
Voltage Detection Sensor Module 25V
Features :
- Output Interface: “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins
- DC input interface: red terminal positive with VCC, negative with GND
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery.
₹13.00 -
Lithium Battery Charging Protection Board-5V Step-Up Power Module
Lithium Battery Charging Protection Board
- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
₹13.00 -
TIP122 Darlington NPN Transistor
Collector-Emitter Voltage (Vce) (V) 45 Emitter-Base Voltage (Veb) (V) 6 Collector Current (DC) (A) 100m Junction Temperature (°C) 150 Storage condition (℃) -65 to 150 ₹14.00 -
FRC connector male 40 pin (Pack of 2)
-
Features/Specs:
- 40 Pin Box Header Male Straight
- Arrangement: 20 x 2 pins
- Pitch: 2.54 mm
- Current Rating: 3 A max
- Working Voltage: 250V AC
- Gender: Male
- Connector Type: IDC
- Current Rating: 3A
- Insulation Resistance: 1000MΩ MIN
- Contact Impedance: 15mΩ MAX
- Mounting Type: PCB Mount
- Contact Material: Phosphor Bronze
- Operating Temperature: -25°C ~ +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹14.00 -
-
FRC connector female 40 pin (Pack of 2)
-
Features/Specs:
- Gender: Female
- Connector Type: IDC
- Number Of Contacts: 40
- Number Of Rows: 2
- Pitch: 2.54mm
- Current Rating: 2A
- Mounting Type: Cable Mount
- Contact Material: Phosphor Bronze
- Minimum Operating Temperature: -65°C
- Maximum Operating Temperature: +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹14.00 -
-
-
Piezo Electronic Buzzer Beep 9v-12v Buzzer Electromagnetic
Rated Voltage: 5VDC
Operating Voltage: 4-8VDC
Max.Rated Current: 40mA
Coil Resistance(DC): 45±5Ω
Coil Resistance(DC): 80Ω
Min.Sound Pressure Level: 85dB/10cm
Resonant Frequency: 2400Hz
Operating Temperature: -20～+70℃
Storage Temperature: -30～+80℃₹15.00 -
TIP32C PNP Bipolar Power Transistor
- Polarity: PNP
- Transistor type: BJT single power
- Pin counts: 3
- package contains: 1 x transistor IC
₹15.00
