No products in the cart.
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
1K ohm Resistor -2 Watt (5 Pieces Pack)
Features
Electronics Components Passive Components Electronics Components Type Resistors Resistor Type Carbon Film Resistor Resistance Value 1 Ohms Power Rating of Resistor 2 Watt Tolerance 5% ₹20.00 (Price is Exclusive of GST)1K ohm Resistor -2 Watt (5 Pieces Pack)
₹20.00 (Price is Exclusive of GST)6E8 ohm 5 Watt Wire Wound Resistor (Pack of 2)
Features/Specs:
- Resistor Value: 6.8 ohm
- Wattage: 5 Watt
- Type: Wire Wound
₹30.00 (Price is Exclusive of GST)6E8 ohm 5 Watt Wire Wound Resistor (Pack of 2)
₹30.00 (Price is Exclusive of GST)Original ARDUINO NANO 33 BLE Board (Without Header)
Bluetooth and BLE
The communications chipset on the Nano 33 BLE can be both a BLE and Bluetooth client and host device. Something pretty unique in the world of microcontroller platforms. If you want to see how easy it is to create a Bluetooth central or a peripheral device, explore the examples at our Arduino BLE library.
Features:
- 9 axis inertial sensor: what makes this board ideal for wearable devices
- humidity, and temperature sensor: to get highly accurate measurements of the environmental conditions
- barometric sensor: you could make a simple weather station
- microphone: to capture and analyze sound in real-time
₹1,592.00₹2,999.00(Price is Exclusive of GST)Original ARDUINO NANO 33 BLE Board (Without Header)
₹1,592.00₹2,999.00(Price is Exclusive of GST)- ₹10.00 (Price is Exclusive of GST)
3E9 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (Price is Exclusive of GST) 6 Flexible Arms Soldering Station With Swiveling Alligator Clip
Features :
- Built-in Trays for components and screws.
- 6 flexible arms each with a large swiveling alligator clip.
- 6+1 pockets in beautifully base to hold loose components.
- 6 Silicon clip tips for the ultimate heat resistance.
- 6 Removable feet for a stable standalone operation.
- Integrates perfectly with Panavise vices and base mounts.
₹1,249.00₹1,500.00(Price is Exclusive of GST)6 Flexible Arms Soldering Station With Swiveling Alligator Clip
₹1,249.00₹1,500.00(Price is Exclusive of GST)Orange 3.7V 1500mAh 25C 1S Lithium Polymer Battery Pack
Features:
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹625.00₹799.00(Price is Exclusive of GST)Orange 3.7V 1500mAh 25C 1S Lithium Polymer Battery Pack
₹625.00₹799.00(Price is Exclusive of GST)Orange 3.7V 1300mAh 25C 1S Lithium Polymer Battery Pack
Features:
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance
- Good Temperature Control
- Minimum weight in Class
₹586.00₹699.00(Price is Exclusive of GST)Orange 3.7V 1300mAh 25C 1S Lithium Polymer Battery Pack
₹586.00₹699.00(Price is Exclusive of GST)Orange 11.1V 1300mAh 30C 3S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,250.00₹1,299.00(Price is Exclusive of GST)Orange 11.1V 1300mAh 30C 3S Lithium Polymer Battery Pack
₹1,250.00₹1,299.00(Price is Exclusive of GST)Orange 11.1V 1800mAh 30C 3S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,257.00 (Price is Exclusive of GST)Orange 11.1V 1800mAh 30C 3S Lithium Polymer Battery Pack
₹1,257.00 (Price is Exclusive of GST)Orange 11.1V 4200mAh 35C 3S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹2,515.00 (Price is Exclusive of GST)Orange 11.1V 4200mAh 35C 3S Lithium Polymer Battery Pack
₹2,515.00 (Price is Exclusive of GST)Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
Features:
- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid-state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 20KHz. Support both locked-antiphase and sign-magnitude PWM operation.
- 2 activation buttons for fast test on each channel.
₹1,650.00 (Price is Exclusive of GST)Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
₹1,650.00 (Price is Exclusive of GST)Anycubic Kobra Neo-3D Printer
Technical Specifications
● Leveling: 25-point automatic leveling
● Printing platform: 8.7 x 8.7 inches / 220 x 220 mm
● Filament run-out detection: optional
● Printing material: PLA / ABS / PETG & TPU
● Nozzle size: ø 0.4 mm (replaceable)
● Nozzle temperature: ≤ 500 °F / 260 °C
● Hot bed temperature: ≤ 230 °F / 110 °C
● Printing speed: ≤100 mm/s (Max speed)
● Control panel: 2.4″ LCD screen with a control knob
● Z-axis: single threaded rod
● Printing dimensions: 250 x 220 x 220 mm (HWD)
● Machine dimensions: 490 x 445 x 443 mm
₹12,100.00 (Price is Exclusive of GST)Anycubic Kobra Neo-3D Printer
₹12,100.00 (Price is Exclusive of GST)
