No products in the cart.
600VA/360Watt Uninterrupted Power Supply -UPS FPS-755
- Compact Design Line Interactive UPS with Load Capacity of 360Watts / 600VA. Output Frequency (sync to mains) : 47 – 63 Hz Sync to mains
- Three Battery Backed up and Surge Protected 6A, 2/3 Pin Output Indian Power Socket
₹2,000.00 (Price is Exclusive of GST)600VA/360Watt Uninterrupted Power Supply -UPS FPS-755
₹2,000.00 (Price is Exclusive of GST)LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
Features Of HTC LX-103 Digital Lux Meter:
- Large Range up to 200000Lux
- Large LCD Display with Back Light and Bar Graph
- Auto Power Off
- MAX/MIN and Data Hold
₹2,015.00 (Price is Exclusive of GST)LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
₹2,015.00 (Price is Exclusive of GST)Orange 7.4V 4200mAh 35C 2S Lithium Polymer Battery Pack
- Model No: ORANGE 4200/35C
- Voltage: 7.4V
- Max Continuous Discharge: 35C
- Balance Plug: JST-XH
- Discharge Plug: XT-60
- Dimensions: 136 x43 x16 (mm )
- Weight: 130 gm
₹2,016.00 (Price is Exclusive of GST)Orange 7.4V 4200mAh 35C 2S Lithium Polymer Battery Pack
₹2,016.00 (Price is Exclusive of GST)Mega2560 R3 RAMPS 3D Printer Controller Board (1.4 MKS Gen L V1.0)
Pin Diagram:
Features:
1. Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
2. Firmware can have the same configuration as ramps1.4
3. Easy DISPLAY + SD-CARD connector, RepRapDiscount SmartController compatible pin header on board
4. Easy connect MKS TFT to AUX-1
5.3x temperature ADC connectors for thermistors
6.up 5 motor driver with A4982
7.4x PWM enable mosfet outputs voltage selector switch for Main Power. (Bed, Extruder0, Extruder1, Fans)
8.4 layers PCB, optimize heat dissipation.
9.6x end stop connectors with power supply Xmin / Xmax / Ymin / Ymax / Zmin / Zmax
10. Resettable fuse for short circuit.
₹2,022.00 (Price is Exclusive of GST)Mega2560 R3 RAMPS 3D Printer Controller Board (1.4 MKS Gen L V1.0)
₹2,022.00 (Price is Exclusive of GST)Lemon Lithium Polymer Battery Pack 1800mAh 3S 75C/150C
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹2,025.00 (Price is Exclusive of GST)Lemon Lithium Polymer Battery Pack 1800mAh 3S 75C/150C
₹2,025.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 7.4V 5600mAh 2S2P 60A/70A Discharge Li-ion Drone Battery Pack
- Nominal Capacity (mAh): 5600
- Nominal Voltage (v): 7.4
- Max Charging Voltage (v): 8.4
- Charge Port: 3 Pin JST XH
- Discharge Port: Amass XT60
₹2,054.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 7.4V 5600mAh 2S2P 60A/70A Discharge Li-ion Drone Battery Pack
₹2,054.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 14.8V 2800mAh 4S1P 30A/35A Discharge Li-ion Drone Battery Pack
- Nominal Capacity (mAh): 2800
- Nominal Voltage (v): 14.8
- Max Charging Voltage (v): 16.8
- Charge Port: 5 Pin JST XH
- Discharge Port: Amass XT60
₹2,054.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 14.8V 2800mAh 4S1P 30A/35A Discharge Li-ion Drone Battery Pack
₹2,054.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 14.8V 2800mAh 4S1P 30A/35A Discharge Li-ion Drone Battery Pack with XT30
- Nominal Capacity (mAh): 2800
- Nominal Voltage (v): 14.8
- Max Charging Voltage (v): 16.8
- Charge Port: 5 Pin JST XH
- Discharge Port: Amass XT60
₹2,054.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 14.8V 2800mAh 4S1P 30A/35A Discharge Li-ion Drone Battery Pack with XT30
₹2,054.00 (Price is Exclusive of GST)OTG Android 5.8G UVC AV Phone Receiver
OTG Android
- Model: ROTG01
- Name: UVC OTG FPV Receiver
- Channel: 150CH
- Power Supply: 5V(by smartphone)
- Connector: SMA Female
₹2,061.00 (Price is Exclusive of GST)OTG Android 5.8G UVC AV Phone Receiver
₹2,061.00 (Price is Exclusive of GST)Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
Features:
- Accurate and Reliable: laser detection, stable, good consistency.
- Quick response: response time is less than 10 seconds when the scene changes.
- Easy integration: UART output (or IO output can be customized), fan built-in.
- High resolution: the resolution of 0.3ug/m3.
₹2,078.00 (Price is Exclusive of GST)Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
₹2,078.00 (Price is Exclusive of GST)Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
- Speed Control : 8000-30000 rpm
- Diameter extension : 0.5 to 3.2 mm
- Number of tools including chucks : 75 pcs
- Performance : 130W
- Weight milling : 0.5 kg
- Package weight : 1.8 kg
- Dimensions : 240 mm length
- Power : 230V / 50Hz
₹2,100.00 (Price is Exclusive of GST)Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
₹2,100.00 (Price is Exclusive of GST)Raspberry Pi 3 Model A+
To Get Started You’ll Need:
- A micro SD card with NOOBS (see Software & OS tab)
- A high-quality 2.5A micro USB power supply, such as the official Raspberry Pi Universal Power Supply.
Software installation:
Beginners should start with the NOOBS (New Out Of Box Software) operating system installation manager, which gives the user a choice of the operating system from the standard distributions.
SD cards with NOOBS pre-installed should be available from any of our global distributors and resellers. Alternatively, you can download NOOBS.
Raspbian is the recommended operating system for normal use on a Raspberry Pi.
Find help with installing Raspbian on your Pi in our online Getting started guide.
You can browse basic examples to help you get started with some of the software available in Raspbian, find more detail about the Raspbian operating system, or read information on fundamental Linux usage and commands for navigating the Raspberry Pi and managing its file system and users.
₹2,199.00 (Price is Exclusive of GST)Raspberry Pi 3 Model A+
₹2,199.00 (Price is Exclusive of GST)