- “Tattu 22.8V 10C 6S 25000mAh LiPo HV Battery pack with XT90-S Anti Spark Plug for UAV” already exists in your wishlist
-
₹49.00 (Price is Exclusive of GST)12V DC Cooling Fan CPU cooler 4.75 INCH, Black
₹49.00 (Price is Exclusive of GST) -
SW-420 Vibration Sensor Module
- Using SW-420 normally closed type vibration sensor.
- Comparator output, clean signal, good waveform, strong driving ability, >15mA.
- Using a wide voltage LM393 comparator.
- With bolt holes for easy installation.
₹49.00 (Price is Exclusive of GST)SW-420 Vibration Sensor Module
₹49.00 (Price is Exclusive of GST) -
DC Power Jack-Female Connector with 2 pin Screw Terminal – Pack of 2
- Connector Type: DC 5.5/2.1mm
- Connector type DC mains
- Electrical mounting screw terminal
- Length of metal part 12mm
- Spatial orientation straight
₹47.00 (Price is Exclusive of GST)DC Power Jack-Female Connector with 2 pin Screw Terminal – Pack of 2
₹47.00 (Price is Exclusive of GST) -
GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt
GT2 Timing Belt 200mm Width-6mm
1 x GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
₹46.00 (Price is Exclusive of GST)GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt
₹46.00 (Price is Exclusive of GST) -
Charger Board Protection Module for Lithium Battery 3S 10A 12V 18650
Charger Board Protection
Features :
- Operating current : 6 – 8A.
- Current limit : 10 – 13A.
- Storage condition : -40 ~ +80 ℃.
- Resting current: less than 30uA.
- Effective lifetime: over 30,000 hours.
- Internal resistance: less than 100mΩ.
- Short-circuit protection: protection.
- Self-recovery delay.
₹46.00 (Price is Exclusive of GST)Charger Board Protection Module for Lithium Battery 3S 10A 12V 18650
₹46.00 (Price is Exclusive of GST) -
I2C Bi-Directional Logic Level Converter- 4 Channel
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
- Level Converter- 4 Channel Compatible with the bread plate, can be used directly put on the breadboard
- 4 Channel Module (great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, NXP Mbed
₹46.00 (Price is Exclusive of GST)I2C Bi-Directional Logic Level Converter- 4 Channel
₹46.00 (Price is Exclusive of GST) -
XL6009 boost converter DC-DC Booster Step Up Power supply module
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
₹46.00 (Price is Exclusive of GST)XL6009 boost converter DC-DC Booster Step Up Power supply module
₹46.00 (Price is Exclusive of GST) -
Infrared IR Wireless Remote Control Module Kit for Arduino
Features :
- Depending on the surrounding environment and the sensitivity of the receiver the transmission distance may be affected.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
₹45.00 (Price is Exclusive of GST)Infrared IR Wireless Remote Control Module Kit for Arduino
₹45.00 (Price is Exclusive of GST) -
OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
Features :
- Switching capacity of 3A at 250VAC, 5A at 125VAC, 0.1A at 30VDC.
- Pin plunger, hinge, long hinge, simulated roller, hinge roller lever actuators available.
- Solder, quick connect, PCB terminals available.
- SPDT, SPST-NC, SPST-NO contact configuration.
- Two split springs ensure high stability and durability.
- Economical, subminiature snap action switch offers long service life (30 million operations minimum)
- All models are free from overtravel restrictions, permit easy setting
- Wide switching capacity range from micro voltage/current loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250VAC)
- Standard operating force, low force or super-low force models available
- RoHS Compliant
₹45.00 (Price is Exclusive of GST)OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
₹45.00 (Price is Exclusive of GST) -
GL-12 840 Hole Solderless Breadboard
- Product model: GL-12
- Product pitch: 840 holes
- Excellent quality breadboard.
- ABS plastic material.
- Reusable for fast build a prototype of an electronic circuit
₹45.00₹65.00(Price is Exclusive of GST)GL-12 840 Hole Solderless Breadboard
₹45.00₹65.00(Price is Exclusive of GST) -
400 Points Breadboard
Features:
Material: abs plastic and tinned phosphor bronze
Uses: experiment, testing, robot
Self adhesive
Perfect for Arduino shield prototyping and testing₹45.00 (Price is Exclusive of GST)400 Points Breadboard
₹45.00 (Price is Exclusive of GST) -
L293D Motor Driver Board
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
₹45.00 (Price is Exclusive of GST)L293D Motor Driver Board
₹45.00 (Price is Exclusive of GST)
