No products in the cart.
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)UNO SMD Atmega328P Development Board compatible with Arduino
Features-
- Flash Memory – 32 KB (ATmega32u4) of which 4 KB used by boot loader
- SRAM – 2 KB (ATmega328P)
- EEPROM – 1 KB (ATmega328P)
₹190.00₹550.00(Price is Exclusive of GST)UNO SMD Atmega328P Development Board compatible with Arduino
₹190.00₹550.00(Price is Exclusive of GST)
Unsoldered GY-2561 TSL2561 Luminosity Sensor Light Intensity Module
1.Model: TSL2561
2.I2C interfaces
3.Power supply:3.3v to 5v
4.low supply current max: 0.6mA
₹285.00 (Price is Exclusive of GST)Unsoldered GY-2561 TSL2561 Luminosity Sensor Light Intensity Module
₹285.00 (Price is Exclusive of GST)USB 2.0 Cable Type A/B for Arduino UNO
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
₹18.00 (Price is Exclusive of GST)USB 2.0 Cable Type A/B for Arduino UNO
₹18.00 (Price is Exclusive of GST)- ₹85.00 (Price is Exclusive of GST)
USB to TTL Serial Converter Adapter Cable
₹85.00 (Price is Exclusive of GST) USBRS485 USB to Rs485 485 Converter Adapter
- Fully compliant USB 2.0 Standard, backward compatible with USB1.1
- Support system: windows xp, vista, windows 7, Linux, macos and wince5.0 Drive
- Supports baud rate range: 75bps 115200bps, up to 6mbps
₹76.00 (Price is Exclusive of GST)USBRS485 USB to Rs485 485 Converter Adapter
₹76.00 (Price is Exclusive of GST)VEER 360 Altitude hold drone double Battery
- Speed level : Beginner, Moderate and Sports for racing mode.
- 3D Flip Stuns : Get fun with just one click. || Control Mode : Fly with 2.4 GHz Remote.
- One Key Take-Off / Landing : to fly like PRO with safety. || One-Key-Return and Head-Less : So that you don’t worry about losing your Drone.
- Double Battery : Included Double fun with double batteries.
- Package contains :- 1 Drone module, 1 2.4 GHz remote control, 4 safety guards, 2 pcs LiPo battery, 1 charging cable, 1 Instruction manual for operation, 4 Landing Gears, & 1 Screwdriver.
₹5,500.00 (Price is Exclusive of GST)VEER 360 Altitude hold drone double Battery
₹5,500.00 (Price is Exclusive of GST)Vibration Switch Module
- No direction, any angle can trigger the work.
- Sensitivity switches can be selected for the trigger sensitivity according to circuit requirements.
- This switch is suitable for the trigger of the small current circuit.
- Component Type: SW-18015P
- Maximum voltage: 12V
- Rated Heating Current: 20mA
₹18.00 (Price is Exclusive of GST)Vibration Switch Module
₹18.00 (Price is Exclusive of GST)VL53L0X Time Flight (ToF) Laser Ranging Sensor Breakout 940nm GY-VL53L0XV2 Laser Distance Module I2C IIC
- Maximum Sensoring Distance: 2m
- Working Voltage: 2.6V – 5.5V
- Communication mode: serial output, PWM output, the chip itself IIC output.
- Default configuration: serial baud rate 9600, automatic output, high precision mode.
₹390.00 (Price is Exclusive of GST)VL53L0X Time Flight (ToF) Laser Ranging Sensor Breakout 940nm GY-VL53L0XV2 Laser Distance Module I2C IIC
₹390.00 (Price is Exclusive of GST)VL53L0X TOF Based LIDAR Laser Distance Sensor
Applications
- Obstacle detection in robotics.
- Hand detection in hand driers, soap dispensers, faucets, etc.
- Gesture recognition in one dimension.
- Widely used in-camera autofocus to enhance the camera performance in low light or fast-moving objects conditions.
- Used as a proximity sensor in many phones.
₹375.00 (Price is Exclusive of GST)VL53L0X TOF Based LIDAR Laser Distance Sensor
₹375.00 (Price is Exclusive of GST)Voltage Detection Sensor Module 25V
Features :
- Output Interface: “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins
- DC input interface: red terminal positive with VCC, negative with GND
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery.
₹13.00 (Price is Exclusive of GST)Voltage Detection Sensor Module 25V
₹13.00 (Price is Exclusive of GST)W1209 Digital Temperature Controller Switch Thermostat
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
₹95.00₹165.00(Price is Exclusive of GST)W1209 Digital Temperature Controller Switch Thermostat
₹95.00₹165.00(Price is Exclusive of GST)
