-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
-
SGuard GSM and Motion Sensor based Security Device for Home, Office, Shop, Car and Wardrobe
Features:
REAL TIME THEFT ALERT: The detector operates on real time theft alert. An instant call to the registered phone number is placed as soon as the device detects any activity.
WIRELESS & PORTABLE: The motion sensor is wireless and compact, making it highly portable. Having no wires, it’s easy to install the device and also to carry it around.₹3,717.00 (Price is Exclusive of GST)SGuard GSM and Motion Sensor based Security Device for Home, Office, Shop, Car and Wardrobe
₹3,717.00 (Price is Exclusive of GST) -
Bonka 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Voltage(V): 11.1
- Configuration: 3S
- Capacity (mAh): 5200
- Discharge Rate: 45C
₹3,727.00 (Price is Exclusive of GST)Bonka 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,727.00 (Price is Exclusive of GST) -
Pro- Range 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Product: Pro- Range Hard-case Li-Po Battery
- Cell: 3S
- Capacity (mAh): 5200mAh
- Output Voltage (VDC): 11.1V
- Discharge Plug: Female T-connector
- Max. Charge Rate: 45C
₹3,771.00 (Price is Exclusive of GST)Pro- Range 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,771.00 (Price is Exclusive of GST) -
₹3,800.00 (Price is Exclusive of GST)
Flysky CT6B Remote 6 Channel Transmitter and Receiver
₹3,800.00 (Price is Exclusive of GST) -
Snap Circuits Jr. SC-100 Kit
- Dr. Toy 100 Best Children’s Products
- Dr Toy Best Educational Products
- Valuable component to a rounded STEM curriculum
- Build working models of a photo sensor
₹3,919.00 (Price is Exclusive of GST)Snap Circuits Jr. SC-100 Kit
₹3,919.00 (Price is Exclusive of GST) -
Raspberry Pi 4 Model B 2GB RAM
Raspberry Pi 4 Model 2GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹3,954.00₹4,899.00(Price is Exclusive of GST)Raspberry Pi 4 Model B 2GB RAM
₹3,954.00₹4,899.00(Price is Exclusive of GST) -
Orange 7.4V 8000mAh 35C 2S Lithium Polymer Battery Pack
- Model No: ORANGEÂ 8000mAh 2S
- Voltage:Â 7.4V
- Max Continuous Discharge: 35C
- Discharge Plug: XT-60
- Dimension: 18 x 6 x 2cm
- Weight: 403g
₹4,033.00 (Price is Exclusive of GST)Orange 7.4V 8000mAh 35C 2S Lithium Polymer Battery Pack
₹4,033.00 (Price is Exclusive of GST) -
Orange 7.4V 4800mAh 100C 2S Hardcase Lithium Polymer Battery Pack
- Model: Orange 4800mAh 2S 100C/200C
- Voltage: 7.4V
- Cell: 2S
- Battery Capacity: 4800 mAh
- Weight: 226g
₹4,034.00 (Price is Exclusive of GST)Orange 7.4V 4800mAh 100C 2S Hardcase Lithium Polymer Battery Pack
₹4,034.00 (Price is Exclusive of GST) -
Pro-Range 14.8V 5200mAh 40C 4S Lithium Polymer Battery Pack
- Model No:Â Pro-Range 42999/4S-40C
- Weight:488Â gm.
- Voltage:Â 14.8V.
- Dimensions : 137 x 44 x 40 (L x W x H)(mm ).
- Constant Discharge: 40C.
- Max discharge : 50C (10 sec).
- Balance Plug: JST-XH.
- Discharge Plug: XT60.
₹4,034.00 (Price is Exclusive of GST)Pro-Range 14.8V 5200mAh 40C 4S Lithium Polymer Battery Pack
₹4,034.00 (Price is Exclusive of GST) -
RunCam Phoenix 2 Micro FPV Camera for Quadcopters
Features:
- New upgraded CPU for better performance
- High quality 6 layer glass lens for better picture
- Supports Image Mirror & Flip
- Low latency, high performance
- Excellent low light performance
₹4,060.00 (Price is Exclusive of GST)RunCam Phoenix 2 Micro FPV Camera for Quadcopters
₹4,060.00 (Price is Exclusive of GST) -
Pro-Range INR 18650 P28A 14.8V 5600mAh 4S2P 60A/70A Discharge Li-ion Drone Battery Pack
- Nominal Capacity (mAh): 5600
- Nominal Voltage (v): 14.8
- Max Charging Voltage (v): 16.8
- Charge Port: 5 Pin JST XH
- Discharge Port: Amass XT60
₹4,068.00 (Price is Exclusive of GST)Pro-Range INR 18650 P28A 14.8V 5600mAh 4S2P 60A/70A Discharge Li-ion Drone Battery Pack
₹4,068.00 (Price is Exclusive of GST) -
XBEE S2C 802.15.4 RF Modules
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
₹4,071.00 (Price is Exclusive of GST)XBEE S2C 802.15.4 RF Modules
₹4,071.00 (Price is Exclusive of GST)























