Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
7404 NOT Logic Gate IC
- IC 74LS04 can deliver -0.4 mA current when the output is high.
- It can deliver 16 mA current when the output is low.
- When the Vcc is 5V and the input signal is 5V then the IC draws 1 mA current.
- When the Vcc is 5V and the input signal is 2.7V then the IC draws 20 to 40 micro-ampere currents.
- When the Vcc is 5V and the input signal is 0.4V then the IC draws -1.6 mA current.
₹12.00 (Price is Exclusive of GST)7404 NOT Logic Gate IC
₹12.00 (Price is Exclusive of GST)12V Suger Cube Relay Switch – PCB Mount
- 12V Relay DC operable for PCB Mount
- Low Power Consumption
- Load Capacity of 250V at 7amp
- Insulated body
- Contact Capacity: 10A 125V, 7A 250V
- Max Switching Current :7A
- Max Switching Voltage: 28V DC/ 250V AC
₹12.00 (Price is Exclusive of GST)12V Suger Cube Relay Switch – PCB Mount
₹12.00 (Price is Exclusive of GST)5V Relay Switch PCB Mount
- Trigger Voltage: 5V Relay Switch PCB Mount
- Trigger Current : 20 mA
- Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
₹12.00 (Price is Exclusive of GST)5V Relay Switch PCB Mount
₹12.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
Timing Pulley
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for 3D Printers
₹11.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
₹11.00 (Price is Exclusive of GST)3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
This heat sinks haves short profiles that are enough to fit within standard raspberry pi cases. Includes one large and two small heat sinks.Easy to apply heatsinks for a raspberry pi board.
₹11.00 (Price is Exclusive of GST)3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
₹11.00 (Price is Exclusive of GST)LDR (Light Dependent Resistor) Sensor 3mm
- Diameter: 3mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: +800°C (Approx.)
- Dark resistance:1-20 Mohm
₹11.00 (Price is Exclusive of GST)LDR (Light Dependent Resistor) Sensor 3mm
₹11.00 (Price is Exclusive of GST)
AMS1117-5.0V, 1A, SOT-223 Voltage Regulator IC
- Low dropout voltage
- Load regulation: 0.2% typical
- Optimized for Low Voltage
- On-chip thermal limiting
- Built-in thermal shutdown
- Good noise rejection
₹10.00 (Price is Exclusive of GST)AMS1117-5.0V, 1A, SOT-223 Voltage Regulator IC
₹10.00 (Price is Exclusive of GST)0603 Green LED SMD Surface Mount (Pack of 5)
- Low power consumption
- Wide viewing angle
- Ideal for backlight and indicator
- Lens Appearance: Transparent
₹10.00 (Price is Exclusive of GST)0603 Green LED SMD Surface Mount (Pack of 5)
₹10.00 (Price is Exclusive of GST)0603 Surface Mount LED Yellow (Pack of 5)
- Low power consumption
- Wide viewing angle
- Ideal for backlight and indicator
- Lens Appearance: Transparent
₹10.00 (Price is Exclusive of GST)0603 Surface Mount LED Yellow (Pack of 5)
₹10.00 (Price is Exclusive of GST)0603 Surface Mount LED White (Pack of 5)
- Low power consumption
- Wide viewing angle
- Ideal for backlight and indicator
- Lens Appearance: Transparent
₹10.00 (Price is Exclusive of GST)0603 Surface Mount LED White (Pack of 5)
₹10.00 (Price is Exclusive of GST)RM065-503(50K)-BOCHEN(Chengdu Guosheng Tech)-±25% 100mW 50kΩ Plugin Potentiometers, Variable Resistors ROHS
- MPN: RM065-503(50K)
- Brand: BOCHEN(Chengdu Guosheng Tech)
- MOQ Reel: 500/Bag
- Packaging Type: Bag
₹10.00 (Price is Exclusive of GST)RM065-503(50K)-BOCHEN(Chengdu Guosheng Tech)-±25% 100mW 50kΩ Plugin Potentiometers, Variable Resistors ROHS
₹10.00 (Price is Exclusive of GST)- ₹10.00 (Price is Exclusive of GST)
74HC02 Quad 2-Input NOR Gate IC (7402 IC) DIP (pack of 5)
₹10.00 (Price is Exclusive of GST)
