-
FRC connector male 40 pin (Pack of 2)
-
Features/Specs:
- 40 Pin Box Header Male Straight
- Arrangement: 20 x 2 pins
- Pitch: 2.54 mm
- Current Rating: 3 A max
- Working Voltage: 250V AC
- Gender: Male
- Connector Type: IDC
- Current Rating: 3A
- Insulation Resistance: 1000MΩ MIN
- Contact Impedance: 15mΩ MAX
- Mounting Type: PCB Mount
- Contact Material: Phosphor Bronze
- Operating Temperature: -25°C ~ +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹14.00 (Price is Exclusive of GST)FRC connector male 40 pin (Pack of 2)
₹14.00 (Price is Exclusive of GST) -
-
Male DC Power Plug Jack Connector
- Excellent material, fine workmanship.
- Suitable for 6 to 30 V 1A Applications
- Compatible with 5.5mm barrel female jacks
- Color: Black.
- Avoid the polarity conflict and short circuit.
₹14.00 (Price is Exclusive of GST)Male DC Power Plug Jack Connector
₹14.00 (Price is Exclusive of GST) -
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
- Material: Steel
- Set: M3x4
- Length of Allen Key: 48 mm
- Width of Allen Key: 1.5 mm
- Inner Diameter of grub: 1.5 mm
- Outer Diameter of Grub: 2.8 mm
₹13.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
₹13.00 (Price is Exclusive of GST) -
Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
- Material: Steel
- Length of Allen Key: 48 mm
- Width of Allen Key: 1.9 mm
- Inner Diameter of grub: 2 mm
- Outer Diameter of Grub: 3.8 mm
₹13.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
₹13.00 (Price is Exclusive of GST) -
Voltage Detection Sensor Module 25V
Features :
- Output Interface: “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins
- DC input interface: red terminal positive with VCC, negative with GND
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery.
₹13.00 (Price is Exclusive of GST)Voltage Detection Sensor Module 25V
₹13.00 (Price is Exclusive of GST) -
100nF 1206 Surface Mount Multilayer Ceramic Capacitor(Pack of 3)
Features:
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen-free compliant
₹13.00 (Price is Exclusive of GST)100nF 1206 Surface Mount Multilayer Ceramic Capacitor(Pack of 3)
₹13.00 (Price is Exclusive of GST) -
TTP223B Digital Capacitive Touch Sensor Module
- Low power consumption.
- Power supply for 2 ~ 5.5V DC
- Can replace the traditional touch of a button, touch area.
- Four m2 screws positioning holes for easy installation, power indicator green led, power on the right that is shiny.
- Control interface : A total of three pins (gnd, vcc, sig), gnd to ground , vcc is the power supply , sig digital signal output pin.
₹13.00₹35.00(Price is Exclusive of GST)TTP223B Digital Capacitive Touch Sensor Module
₹13.00₹35.00(Price is Exclusive of GST) -
3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
This heat sinks haves short profiles that are enough to fit within standard raspberry pi cases. Includes one large and two small heat sinks.Easy to apply heatsinks for a raspberry pi board.
₹12.00 (Price is Exclusive of GST)3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
₹12.00 (Price is Exclusive of GST) -
PCB Drill bit
Drill bit Applications:
- Drilling PCBs
- Drilling ornaments
- Drilling thin Aluminium plates
Drill bit specification:
- 0.8mm diameter
- High quality stainless steel
- Long term durability
- Good for though surfaces
₹12.00 (Price is Exclusive of GST)PCB Drill bit
₹12.00 (Price is Exclusive of GST) -
3296W 1k Ohm Trimpot Trimmer Potentiometer
Specification
- Series: 3296
- Resistance Tolerance : 10%
- Mounting Style: PCB Mount
- Adjustment: Top Slot
- Number of Turns: Multiturn
₹12.00 (Price is Exclusive of GST)3296W 1k Ohm Trimpot Trimmer Potentiometer
₹12.00 (Price is Exclusive of GST) -
₹12.00 (Price is Exclusive of GST)3E9 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹12.00 (Price is Exclusive of GST) -
₹12.00 (Price is Exclusive of GST)
Miniature Vibration Motor with Wire Mini Motor 4 * 8mm
₹12.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
