-
Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – 5Pcs
Tensioner Torsion Spring
5 x Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer
₹40.00 -
220 Ohm 0.25W Metal Film Resistor (Pack of 100)
220 Ohm 0.25W Metal Film Resistor
Resistance (Ω): 220
Tolerance (%): 1
 Maximum Working Voltage (V): 250
 Maximum Overload Voltage (V): 500
 Temperature Co-efficient: ±50 ppm/°C
Operating Temperature (°C): –40 to 150
Mounting Type: Through Hole
Â
₹40.00 -
IRF540N (TO-220-3) MOSFET (Pack Of 2 ICs)
IRF540N (TO-220-3) MOSFETÂ
- Drain to source voltage Vds is 100V
- Gate to source voltage is ±20V
- On Resistance Rds(on) of 44mohm at Vgs of 10V
- Power dissipation Pd of 130W at 25°C
₹40.00 -
LM6UU 6 MM Linear Motion Bearing
LM6UU 6 MM Linear Motion Bearing
Features :
- Outer Casing: Chromium Steel
- Low friction, optimum loading capacity, long life.
- It has linear bearing ball cage, hardened coat at both end rings.
- No worry if replacement of any worn part.
- Low noise even in high-speed operation.
₹42.00 -
DC Power Jack-Female Connector with 2 pin Screw Terminal – Pack of 2
- Connector Type: DC 5.5/2.1mm
- Connector type DC mains
- Electrical mounting screw terminal
- Length of metal part 12mm
- Spatial orientation straight
₹47.00 -
2400-2500 MHz 3dBi 3G/4G LTE PCB Antenna
Application: 2G, 3G, 4G LTE, ISM
Features:
- Compact Size
- High quality
- Low cost
- 3M high-quality adhesive
- Masking for corrosion-free
₹48.00 -
M3 x 10mm CHHD Bolt and Nut Set-25 pcs.
Bolt and Nut Set
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 25 sets.
- Nut Type: Hex
₹48.00 -
M4 x 20mm CHHD Bolt and Nut Set-20Pcs.
M4 x 20mm
- Type: M4 (4.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 20 sets.
- Nut Type: Hex
₹48.00 -
M3 x 25mm CHHD Bolt and Nut Set-20pcs.
M3 x 25mm
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 20 sets.
- Nut Type: Hex
₹48.00 -
M3 X 8mm Bolt and Nut Set-25 pcs.
M3 X 8mm
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Length: 8mm
- Bolt Head Style: Slotted & Round
- Pack Quantity: 25 sets.
₹48.00 -
1k Ohm 1W Metal Film Resistor (Pack of 40)
1k Ohm 1W Metal Film Resistor
- Resistance: 1k Ohm
- Max. Working Voltage: 500 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
- Operating Temperature Range: -40ºC to 125ºC
₹49.00 -
Electrolytic Capacitor 10 uF 25V (Pack of 40)
 Electrolytic CapacitorÂ
- Capacitance: 10 uF
- Voltage: 25V
- Type: Through-hole electrolytic
- Operating temperature: -40ºC to 125ºC
- Pack of 40 pieces
- Capacitor dimension (each): 4.1 x 8.2 x 32 mm
₹49.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Tools & Equipments
- Bulk/Wholesale