-
GY-51 LSM303DLH 3-Axis Magnetic Field Acceleration Module
Features:
- Integrated three-axis magnetometer and a tri-axial accelerometer with a digital interface.
- Comes with automatic detection.
- Also incorporates high-performance accelerometers.
- Accelerometers can run on LOW power mode.
₹276.00 -
Seed Studio Grove 6 Axis Accelerometer & Gyroscope (BMI088)
Features:
- The BM1088 is designed for drones, robotics and industrial applications with challenging performance requirements.
- Wide acceleration measurement range(up to 24g)
- The accelerometer features a low TCO of 0.2 mg/K and low spectral noise of only 230 pg/sqrt(Hz) in the widest measurement range of ± 24 g
₹3,595.00 -
BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹40.00 -
GY-521 ADXL335 Module 3-axis Analog Output Accelerometer
Features :
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build-in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
- Designed for 5V logic level
₹115.00 -
GY-273 HMC5883L Triple Axis Magnetometer Sensor Module
Features:
- 1-2 degree heading accuracy.
- A range of -8 to +8 Gauss.
- Communication: IIC communication protocol.
₹175.00 -
ADXL345 3 Axis Accelerometer Gravity Module
- On-board ADXL345, it’s a low cost cap-based accelerometer sensor
- Support 5V/3.3V voltage input, onboard RT9161, better performance than 1117, faster load the appropriate speed, it is ideal for high noise power supply environment
- Common Pins were lead out, Pin distance is standard 100mil (2.54mm), compatible for your new system
- Communication: I2C
₹155.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Tools & Equipments
- Bulk/Wholesale