-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Soldering Stand with Magnifying Glass and Helping Hand
*With two LED lighting ,this model can work very well in the dark environment.
*With 3 pcs of AAA batteries,large capacity,this model can continuously discharge more than 10 hours,expediently be used.
₹350.00 -
Water Level Depth Detection Sensor
The Sensor is the Analog type which produces analog output signals according to the water pressure with its Detection Area of 40x16mm. Below are some details:
- Operating voltage: DC3-5V
- Operating current: less than 20mA
- Sensor Type: Analog
- Detection Area: 40mmx16mm
- Operating temperature: 10℃-30℃
- Humidity: 10% -90% non-condensing
₹25.00₹65.00Water Level Depth Detection Sensor
₹25.00₹65.00 -
Desoldering Pump Tool
- One-handed solder sucker with powerful suction whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome
₹85.00Desoldering Pump Tool
₹85.00 -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 -
Quadcopter Drone DIY Kit – V2
Drone DIY Kit Package Contents:
1 x F450 Quadcopter Frame
1 x Flysky i6 Radio Transmitter and Receiver with programmer
4 x 30A ESC
4 x A2212 1000/1400 KV Brushless Motor
1 x Naze 32 Flight Control Board
4 x 1045 (2CW+2CCW) Black Propeller
1 x Lipo Battery ChargerFeatures:
F450 Frame based Quadcopter Kit
Includes 30A ESC for speed control and Lipo battery Charger
Flight Control board Naze 32/ KK 2.1.5
Flysky i6 Radio controller transmitter receiver wireless
Includes Brushless motors and Propellers₹12,500.00Quadcopter Drone DIY Kit – V2
₹12,500.00 -
DC Straight BO Motor for Smart Car Robot
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
₹55.00 – ₹75.00DC Straight BO Motor for Smart Car Robot
₹55.00 – ₹75.00 -
DC 3V – 12V Amphibious Horizontal Micro Pump
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
₹60.00 -
ATmega328P Micro-Controller IC
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
₹300.00ATmega328P Micro-Controller IC
₹300.00 -
MK4 Ultron Arduino Based Development Board
MK4 Ultron Arduino
The MK 4 is a specialized, high-quality Arduino-based development board designed for a variety of electronic projects and educational purposes. Made in India, this board features the robust ATmega 328P microcontroller, ensuring reliable performance for both DIY enthusiasts and professionals. It comes with an integrated motor driver, making it perfect for robotics and automation projects.
The MK 4 includes a built-in buzzer and power pins, enhancing its functionality. The fastest bootloader ensures quick and efficient start-up times. Additionally, the Type-C cable provided makes programming straightforward and convenient.
₹1,650.00 -
Water Protection Level Sensor Photoelectric -ROBFS-IR02B Diameter 14MM
Water Protection Level Sensor
- Model: FS-IR02
- Type: Photoelectric Liquid Level Sensor
- Operating Voltage: 5V DC
- Output Current: 12mA
- Operating Temperature: – 25 ~ 105 °C
- Material: Polycarbonate
₹220.00 -
Piezo Buzzer 15mm
Piezo Buzzer 15mm
- Clear sound
- Ultra-thin and lightweight
- No contacts: therefore, no noise and highly reliable
- Low power consumption for voltage type
- Excellent accessory for acoustic instrument pickups, stompboxes, contact mics, etc.
- Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
- 15mm brass outer diameter plate and ceramic inner diameter plate.
- All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.
₹15.00Piezo Buzzer 15mm
₹15.00
