-
Wire Clipper Nipper
Suitable for dressing components on printed circuit boards. Handles made out of ABS plastics. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip.
₹65.00 (Price is Exclusive of GST)Wire Clipper Nipper
₹65.00 (Price is Exclusive of GST) -
GL-12 840 Hole Solderless Breadboard
- Product model: GL-12
- Product pitch: 840 holes
- Excellent quality breadboard.
- ABS plastic material.
- Reusable for fast build a prototype of an electronic circuit
₹45.00₹65.00(Price is Exclusive of GST)GL-12 840 Hole Solderless Breadboard
₹45.00₹65.00(Price is Exclusive of GST) -
DC Mini Horizontal Submersible Pump
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
₹55.00 (Price is Exclusive of GST)DC Mini Horizontal Submersible Pump
₹55.00 (Price is Exclusive of GST) -
Ceramic Capacitor Kit 250pcs 25 value 1PF-0.1UF
- Good Quality item
- 25 values with 10pcs for each value
₹110.00 (Price is Exclusive of GST)Ceramic Capacitor Kit 250pcs 25 value 1PF-0.1UF
₹110.00 (Price is Exclusive of GST) -
₹1,750.00 (Price is Exclusive of GST)Arduino UNO Kit – Professional Electronics Starter DIY Kit – V1
₹1,750.00 (Price is Exclusive of GST) -
IR Sensor Array 4 way Module
Features:
Working voltage: DC 3.3V-5V
Working current: try to choose more than 1A power supply
Working temperature:Â 10oC +50oC
Mounting aperture: M3 screws₹265.00 (Price is Exclusive of GST)IR Sensor Array 4 way Module
₹265.00 (Price is Exclusive of GST) -
TTP223B Digital Capacitive Touch Sensor Module
- Low power consumption.
- Power supply for 2 ~ 5.5V DC
- Can replace the traditional touch of a button, touch area.
- Four m2 screws positioning holes for easy installation, power indicator green led, power on the right that is shiny.
- Control interface : A total of three pins (gnd, vcc, sig), gnd to ground , vcc is the power supply , sig digital signal output pin.
₹13.00₹35.00(Price is Exclusive of GST)TTP223B Digital Capacitive Touch Sensor Module
₹13.00₹35.00(Price is Exclusive of GST) -
AD8232 ECG Sensor Module Kit for Heart Rate Monitoring
- This electrical activity can be charged as an ECG or Electrocardiogram and output as an analog reading.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection
₹550.00 (Price is Exclusive of GST)AD8232 ECG Sensor Module Kit for Heart Rate Monitoring
₹550.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
₹105.00 (Price is Exclusive of GST)4 Channel 5V Relay Module
₹105.00 (Price is Exclusive of GST) -
470K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 470k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 470k Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (Price is Exclusive of GST)470K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (Price is Exclusive of GST) -
10 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 10 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 10 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹25.00 (Price is Exclusive of GST)10 Ohm Carbon Film Resistor- Pack of 50 pcs
₹25.00 (Price is Exclusive of GST) -
4.7 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 4.7 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 4.7 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (Price is Exclusive of GST)4.7 Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
