-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
₹650.00 (excl. GST)
DuPont Connector Kit -520pcs 2.54MM 1/2/3/4/5/6/7/8P
₹650.00 (excl. GST) -
₹380.00 (excl. GST)
DuPont Connector Shell Kit -620pcs 2.54mm
₹380.00 (excl. GST) -
Durable Rubber Tire Yellow BO Motor Wheel
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
₹28.00 (excl. GST)Durable Rubber Tire Yellow BO Motor Wheel
₹28.00 (excl. GST) -
E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
- Features :
- Diffuse reflective type.
- Digital output.
- Adjustable detection distance.
- Low consumption.
- Compact size.
- Range: 3 – 80cm adjustable
- Power supply: 5V
- Current:Â 100mA
- Red: +5V; Yellow: Signal;Â Green: GND
₹175.00 (excl. GST)E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
₹175.00 (excl. GST) - Features :
-
E88 Pro Drone
E88 Pro Drone
Brand ‎Generic Model Name ‎e88 pro Special Feature ‎AUTO RETURN MOBILE APP CONTROL Age Range (Description) ‎Kid Color ‎black Video Capture Resolution ‎1080p Effective Still Resolution ‎8 Connectivity Technology ‎Wi-Fi Included Components ‎Battery Skill Level ‎Beginner ₹1,500.00 (excl. GST)E88 Pro Drone
₹1,500.00 (excl. GST) -
EasyMech Bracket For NEMA 17 Stepper Motor – STRAIGHT
Features :Â
- Most accurate design for NEMA17 Stepper Motor
- Made from High-Quality MS.
- Equips extra holes for user-defined motor fitting.
₹138.00 (excl. GST)EasyMech Bracket For NEMA 17 Stepper Motor – STRAIGHT
₹138.00 (excl. GST) -
EasyMech Bracket For NEMA23 Stepper Motor – Straight
Features :Â
- Most accurate design for NEMA23 Stepper Motor
- Made from High-Quality MS.
- Equips extra holes for user-defined motor fitting.
₹170.00 (excl. GST)EasyMech Bracket For NEMA23 Stepper Motor – Straight
₹170.00 (excl. GST) -
₹970.00 (excl. GST)
-
Electret Condensor Microphone(Pack of 5)
An electret microphone is a type of electrostatic capacitor-based microphone, which eliminates the need for a polarizing power supply by using a permanently charged material. Unlike other condenser microphones, electret types require no polarizing voltage, but they normally contain an integrated preamplifier, which does require a small amount of power (often incorrectly called polarizing power or bias). This preamp is frequently phantom powered in sound reinforcement and studio applications. Other types include a 1.5 V battery in the microphone housing, which is often left permanently connected as the current drain is usually very small.
₹65.00 (excl. GST)Electret Condensor Microphone(Pack of 5)
₹65.00 (excl. GST) -
Electric Air Blower
- Air Pressure: 400 Mn
- Air Volume: 2.3 m3/min
- No-Load speed: 13000/min
- Watts: 335
- Weight: 1.8 Kg
₹550.00 (excl. GST)Electric Air Blower
₹550.00 (excl. GST) -
Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
- Speed Control : 8000-30000 rpm
- Diameter extension :Â 0.5 to 3.2 mm
- Number of tools including chucks :Â 75 pcs
- Performance :Â 130W
- Weight milling : 0.5 kg
- Package weight :Â 1.8 kg
- Dimensions :Â 240 mm length
- Power : 230V / 50Hz
₹2,100.00 (excl. GST)Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
₹2,100.00 (excl. GST) -
Electrolytic Capacitor 10 uF 25V (Pack of 40)
 Electrolytic CapacitorÂ
- Capacitance: 10 uF
- Voltage: 25V
- Type: Through-hole electrolytic
- Operating temperature: -40ºC to 125ºC
- Pack of 40 pieces
- Capacitor dimension (each): 4.1 x 8.2 x 32 mm
₹49.00 (excl. GST)Electrolytic Capacitor 10 uF 25V (Pack of 40)
₹49.00 (excl. GST)