No products in the cart.
Proto Shield Prototype expansion board for Arduino UNO
Features:
Power rails down the middle and sides
A reset button and an extra general use button
2x 3mm general use LEDs, red and green, as well as 2 matching resistors
A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
A surface-mount chip area for up to 14 SOIC size parts
Compatible with tiny breadboards
Every pin is brought out
Gold plated pads₹82.00₹90.00(Price is Exclusive of GST)Proto Shield Prototype expansion board for Arduino UNO
₹82.00₹90.00(Price is Exclusive of GST)Pulse Heart Rate Sensor
- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625”
- Thickness: 0.125” Thick
₹175.00 (Price is Exclusive of GST)Pulse Heart Rate Sensor
₹175.00 (Price is Exclusive of GST)LM35 TO-92-3 Board Mount Temperature Sensors
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 5C accuracy guaranteeable (at +25C)
- Rated for full −55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 µA current drain
- Low self-heating, 0.08C in still air n Nonlinearity only ±1⁄4C typical
- Low impedance output, 0.1 for 1 mA load
₹52.00 (Price is Exclusive of GST)LM35 TO-92-3 Board Mount Temperature Sensors
₹52.00 (Price is Exclusive of GST)E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
- Features :
- Diffuse reflective type.
- Digital output.
- Adjustable detection distance.
- Low consumption.
- Compact size.
- Range: 3 – 80cm adjustable
- Power supply: 5V
- Current: 100mA
- Red: +5V; Yellow: Signal; Green: GND
₹175.00 (Price is Exclusive of GST)E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
₹175.00 (Price is Exclusive of GST)- Features :
ADXL345 3 Axis Accelerometer Gravity Module
- On-board ADXL345, it’s a low cost cap-based accelerometer sensor
- Support 5V/3.3V voltage input, onboard RT9161, better performance than 1117, faster load the appropriate speed, it is ideal for high noise power supply environment
- Common Pins were lead out, Pin distance is standard 100mil (2.54mm), compatible for your new system
- Communication: I2C
₹155.00 (Price is Exclusive of GST)ADXL345 3 Axis Accelerometer Gravity Module
₹155.00 (Price is Exclusive of GST)MQ4 Gas Sensor Detector Module
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
₹88.00 (Price is Exclusive of GST)MQ4 Gas Sensor Detector Module
₹88.00 (Price is Exclusive of GST)- ₹225.00 (Price is Exclusive of GST)
Raspberry Pi 3 Official Case Box ABS
₹225.00 (Price is Exclusive of GST) 750K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 750k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 750 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (Price is Exclusive of GST)750K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)22K Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 22K Ohm Carbon Film Resistor
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 2.2 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (Price is Exclusive of GST)22K Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)3.3K Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 3.3k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 3.3 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (Price is Exclusive of GST)3.3K Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)1 Ohm Carbon Film Resistor 0.25 Watt – Pack of 50 pcs
- Resistance: 1 Ohm
- Tolerance: 5%
- Max. Working Voltage: 250V
- Temperature Coefficient of Resistance: 50PPM/°C
- length:6mm
- Width:1.7mm
- Weight:12gm
₹55.00 (Price is Exclusive of GST)1 Ohm Carbon Film Resistor 0.25 Watt – Pack of 50 pcs
₹55.00 (Price is Exclusive of GST)TM1638 Button Digital LED Display Module
- Use TM1638 digital tube drive chip to drive a common cathode LED digital tube.
- Can be extended to 3 * 8 buttons, led digital tube and can be controlled separately.
- Support 8 brightness control, led digital tube and use the same brightness.
- Support cascading up to 6 of the same module.
- 8 LED, 8-bit digital tube and 8 buttons, common cathode LED digital tube, such as STC microcontroller can be directly connected.
₹122.00 (Price is Exclusive of GST)TM1638 Button Digital LED Display Module
₹122.00 (Price is Exclusive of GST)