-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Micro SD Card Reader Module
- Features:-
- Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
- The level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
₹65.00Micro SD Card Reader Module
₹65.00 - Features:-
-
Metal Touch Sensor Module
Features:
Working voltage: DC 5V
Low level output signal used for human body touch sensor alarm
Adjustable sensitivity
Single channel signal output
With fixed bolt hole for easy installation₹40.00₹55.00Metal Touch Sensor Module
₹40.00₹55.00 -
LM35 TO-92-3 Board Mount Temperature Sensors
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 5C accuracy guaranteeable (at +25C)
- Rated for full −55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 µA current drain
- Low self-heating, 0.08C in still air n Nonlinearity only ±1⁄4C typical
- Low impedance output, 0.1 for 1 mA load
₹52.00 -
LM2596 DC Step Down Buck Converter Power Supply Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹55.00 -
LDR (Light Dependent Resistor) Sensor 3mm
- Diameter: 3mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: +800°C (Approx.)
- Dark resistance:1-20 Mohm
₹4.00₹7.00LDR (Light Dependent Resistor) Sensor 3mm
₹4.00₹7.00 -
Laser sensor Module 650nm 6mm 5V 5mW Red Laser
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C.
₹39.00 -
IR Sensor Array 4 way Module
Features:
Working voltage: DC 3.3V-5V
Working current: try to choose more than 1A power supply
Working temperature: 10oC +50oC
Mounting aperture: M3 screws₹110.00₹125.00IR Sensor Array 4 way Module
₹110.00₹125.00 -
Infrared IR Transmitter and Receiver (Photo-diode) Pair
Features:
- IR LED (TSFF5210)
- Package type: leaded
- Dimensions : 5mm
- Leads with stand-off
- Peak wavelength: λp = 870 nm
- High reliability
- High radiant power
- High radiant intensity
- Angle of half intensity: = ± 10°
- Low forward voltage
- Suitable for high pulse current operation
- High modulation bandwidth: fc = 24 MHz
- Good spectral matching with Si photodetectors
- IR Photodiode (BPV10NF)
- Package type: leaded
- Dimensions : 5mm
- Leads with stand-off
- Radiant sensitive area (in mm2): 0.78
- High radiant sensitivity
- Daylight blocking filter matched with 870 nm to 890 nm emitters
- High bandwidth: > 100 MHz at VR = 12 V
- Fast response times
- Angle of half sensitivity: ± 20°
₹10.00 - IR LED (TSFF5210)
-
IR Sensor Module Infrared based for Proximity/Object Detection
- Power: 3.3V ~ 5V
- Mounting holes size: 3mm
- Detection range: 2cm ~ 30cm (depending on the obstacle’s color, farthest for white)
- Detection angle: 35°
- LM393 voltage comparator
- Recommended environment: indoor, to avoid the sunshine effect
₹19.00₹24.00 -
Infrared (IR) Proximity/Obstacle Detecting Sensor Module
- BUY IN ORIGINAL FROM OLatus or OL ELECTRONICS STORE ONLY. WE WILL NOTE SUPPORT FAKE MODULES
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc.
- Useful for various Robotic Applications, Object Detection, Visitor Counter, etc
- Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)
₹18.00₹29.00 -
I2C Serial Interface Adapter Module
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
₹65.00 -
High Sensitivity Sound Sensor Module
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
.
₹35.00₹40.00High Sensitivity Sound Sensor Module
₹35.00₹40.00
