-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
-
INGCO 2000 W Patented Metal Power and Hand Tools Heat Gun with Soft Rubber Grip
- Material: Others
- Item Dimension: 700 x 600 x 300 cm
- No Warranty
- INGCO Heat Gun 2000W
- Two speed setting, Thermal protection, Comes with 4 different nozzles & 1pcs scraper
- Material: Metal & Plastic with rubber grip, Color: Orange & Black
- Anti-burn design: the use of three-storey insulation design,can keep the user away from burns,Solidly made and work fine:this gun is made by quality materials
- Heat up quickly:this gun take advantage of double heating wire to achieve fast heating, the display will show real-time temperature
₹3,000.00 (excl. GST)INGCO 2000 W Patented Metal Power and Hand Tools Heat Gun with Soft Rubber Grip
₹3,000.00 (excl. GST) -
Orange 11.1V 4500mAh 35C 3S Lithium Polymer Battery Pack
- Model No: ORANGE 4500 3S
- Voltage: 11.1V
- Max Continuous Discharge: 35C
- Balance Plug: JST-XH
- Discharge Plug: XT-60
₹3,131.00 (excl. GST)Orange 11.1V 4500mAh 35C 3S Lithium Polymer Battery Pack
₹3,131.00 (excl. GST) -
SGuard GSM and Motion Sensor based Security Device for Home, Office, Shop, Car and Wardrobe
Features:
REAL TIME THEFT ALERT: The detector operates on real time theft alert. An instant call to the registered phone number is placed as soon as the device detects any activity.
WIRELESS & PORTABLE: The motion sensor is wireless and compact, making it highly portable. Having no wires, it’s easy to install the device and also to carry it around.₹3,150.00 (excl. GST) -
Mechanzo 9 Plus Robotic Kits
- Contains 200+ parts such as a Remote, Controller Brick, Motors & Gears, Metal Strips & Bars etc.
- The kit can be used to make a number of models…Few of the ones which can be built – Charkha, Harvester, Monkey, Crazy Car, Robotic Arm, Hitting Robot..
- An Assembly Guide providing step-by-step instructions to build the models, also explaining the science concept(s) behind every model..
- With the help of ABL’s custom Controllers, Connectors & Cables the kids can give shape to their imaginations in no time. The kit conforms to all common safety & environmental standards, is completely safe to use.
₹3,350.00₹3,500.00(excl. GST)Mechanzo 9 Plus Robotic Kits
₹3,350.00₹3,500.00(excl. GST) -
Orange 11.1V 5200mAh 40C 3S Lithium Polymer Battery Pack
Features :
- Product?Type:?Lithium Polymer?Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹3,354.00 (excl. GST)Orange 11.1V 5200mAh 40C 3S Lithium Polymer Battery Pack
₹3,354.00 (excl. GST) -
Raspberry Pi 3 Model B Plus
New Original Raspberry Pi 3B Plus Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.
₹3,450.00₹5,800.00(excl. GST)Raspberry Pi 3 Model B Plus
₹3,450.00₹5,800.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Sanitizer Tunnel Kit DC Motor, SMPS, Nozzle and Pipe
The kit contains the below Parts:
1 Piece DC Motor of 24V
1 Piece SMPS Adaptor 24V 2.5Amps
1 Piece 6mm Diameter Output Pipe
1 Piece 10mm Diameter Input Pipe
5 Piece Brass Nozzle with Connector
Input Pipe Connectors₹3,500.00 (excl. GST)Sanitizer Tunnel Kit DC Motor, SMPS, Nozzle and Pipe
₹3,500.00 (excl. GST) -
Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
Features:
Automatic Sensing
8 Liter Tank Capacity
Mist Spray for better output
Easy to Install, just need to plug and use
6 Months Manufacture Warranty
Works under Sunlight₹3,500.00 (excl. GST)Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
₹3,500.00 (excl. GST) -
KK2.1.5 Flight Controller Board-Multi-Rotor LCD
- MCU : Atmega644 PA
- Gyro/Acc: MPU6050
- Auto-level: Yes
- Input Voltage: 4.8-6.0V
- AVR interface: standard 6 pin.
- Signal from Receiver: 1520us (5 channels).
- Signal to ESC: 1520us.
₹3,500.00 (excl. GST)KK2.1.5 Flight Controller Board-Multi-Rotor LCD
₹3,500.00 (excl. GST) -
Seed Studio Grove 6 Axis Accelerometer & Gyroscope (BMI088)
Features:
- The BM1088 is designed for drones, robotics and industrial applications with challenging performance requirements.
- Wide acceleration measurement range(up to 24g)
- The accelerometer features a low TCO of 0.2 mg/K and low spectral noise of only 230 pg/sqrt(Hz) in the widest measurement range of ± 24 g
₹3,595.00 (excl. GST)Seed Studio Grove 6 Axis Accelerometer & Gyroscope (BMI088)
₹3,595.00 (excl. GST) -
Lemon 5500mAh 3S 45C/90C Lithium Polymer Battery Pack
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹3,602.00 (excl. GST)Lemon 5500mAh 3S 45C/90C Lithium Polymer Battery Pack
₹3,602.00 (excl. GST)
