-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Wood Handle Ball Pen Hammer
- 24 torque stabilizing bars
- AntiVibe patented tuning fork
- Bright colour accents, easy to find on work site
- Graphite core shaft for maximum strength
- One-piece forged construction for strength and durability
- Patented Anti-Vibe™ technology reduces vibration transmitted to wrist and elbow
- Patented head to handle assembly for improved safety
- Precision balanced
₹350.00Wood Handle Ball Pen Hammer
₹350.00 -
84-096-23 127mm-5 Needle Nose Miniature Plier
- Long tempered jaws for working in hard to reach areas
- Forged steel construction
- Rust resistant finish
- Double dipped handle for comfort | Meets or exceeds ANSI standards
₹400.00 -
Stanley Bent Nose Pliers 200mm
The angled nose is capable of gripping and maneuvering objects in obstructed situations
Bent nose plier 6”, 8” carbon steel polished₹300.00Stanley Bent Nose Pliers 200mm
₹300.00 -
Stanley 84-214-22 Wire Stripper 130mm
- Size: 130mm / 5 1/4- Inch
- Convenient hole for looping or bending wire
- Ideal for cutting, stripping speaker wire, appliance cords, etc
- Slide adjust for various gauge wire
₹200.00 -
Stanley PLIER Long Nose, 203mm-8
- Features – Forged Steel Construction, Double dipped handles, Rust Resistant Finish
- Specifications – Part No. 84-102, Size: 203mm / 8″ Long Nose Plier
- Applications – Electric and Household applications
₹400.00Stanley PLIER Long Nose, 203mm-8
₹400.00 -
External Nose Circlip Plier – 5 inch -84-332-23
- Limited lifetime warranty offered on the product
- This product comes in a proper packaging
- The first clamp fine polishing and processing blackening, good looking
₹350.00 -
Junior Hacksaw Blades – 12 inch
A pack of ten 150mm blades made from a strong but flexible carbon steel to ensure extra long life.
₹800.00Junior Hacksaw Blades – 12 inch
₹800.00 -
Steel Frame Hacksaw -15-166 305mm/12”
- Depth of Throat: 220mm/8” 3/4”.Blade Size: 254mm / 12-Inch
- Structurally designed for maximum strength and durability
- Designed to cut metal and plastic in hard to reach places
- Ergonomically designed grip with thumb rest for maximum comfort
- Back blade stop for safe handling and use
₹700.00 -
-
Ender 3 Pro 3D Printer – FDM DIY
- Ender 3 Pro 3D Printer comes with a high quality power supply,the heated bed can reach temperatures of 110℃ in just 5 minutes. MK10 Extrusion Mechanism:A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage.
- Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly.
- Employs new magnetic self-adhesive platform sticker rather than traditional masking tape and glue for easy model picking-up,excellent adhesion and less printing cost.
- Simple Leveling Method: Larger Hand-turn Nut, Ergonomic Design, Enabling To Level the Platform More Quickly.
₹14,500.00Ender 3 Pro 3D Printer – FDM DIY
₹14,500.00 -
Flashforge Adventure 3 FDM- 3D Printer
Flashforge Adventure 3 Features:
Screen 2.8-inch touch screen Input 100-240 VAC,47-63Hz Internal Storage 8 GB Data Transmission USB stick,Wi-Fi,Ethernet,FlashCloud,Polar Cloud Software FlashPrint Software Input 3MF/STL/OBJ/JPG/JPEG files Camera 1 Filter Fan External ₹54,000.00Flashforge Adventure 3 FDM- 3D Printer
₹54,000.00
