Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)
2 Channel 5V Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
₹65.00 (Price is Exclusive of GST)2 Channel 5V Relay Module with Optocoupler
₹65.00 (Price is Exclusive of GST)1 Channel 5V Relay Module with Optocoupler
1 channel relay board
– Operating Voltage 5V
– Max Current : 20mA
– Relay Contact Current Capacity at AC250V: 10A₹39.00 (Price is Exclusive of GST)1 Channel 5V Relay Module with Optocoupler
₹39.00 (Price is Exclusive of GST)Pro Mini Atmega328 5V and 16MHz
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹650.00 (Price is Exclusive of GST)Pro Mini Atmega328 5V and 16MHz
₹650.00 (Price is Exclusive of GST)Arduino Nano V3
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹160.00₹500.00(Price is Exclusive of GST)Arduino Nano V3
₹160.00₹500.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)Portable Nano Mist Sanitizer Sprayer – USB Rechargeable
- [USB RECHARGEABLE] This machine can be refilled and recharge, comes with a portable USB cable.Capacity of this machine is about 30ml. Fill 30ml of Alcohol based Sanitizer in it. Make sure machine should be fully charge it before use. Just click the power button and sanitize your valuable.
- [High 380mah Li-ion Battery] : Homehop Automatic Nano facial Sanitizer sprayer disinfectant liquid alcohol spray hygienic machine has high 380 mAh Li-ion Battery.
- [30 ML CAPACITY] : The spray machine has a capacity of 30 ml and can be sprayed continuously for 20 minutes. 24 hours a day is enough to keep your stuff safe ( Not use Thick or Gel) in it.
- [PORTABLE SIZE FOR EVERYDAY CARE] Small size and light weight. You can conveniently put it in your backpack, sanitize it all day, This ca also be used as a Water Mist to refresh the Skin
₹250.00 (Price is Exclusive of GST)Portable Nano Mist Sanitizer Sprayer – USB Rechargeable
₹250.00 (Price is Exclusive of GST)Digital Non-Contact Infrared Forehead Thermometer Gun with Display
- Human body engineering design – strengthen his hand grip handle experience, and be convenient to measure
- Body temperature measurement: 32.0 43°c / 90 109.4°f ambient temperature measurement: 0-60°c / 32-140°f accuracy: (+ -) 0.2°c measurement distance: 1 to 15cm (within 5cm is the best) auto-shutdown time: about 7s power supply: 2 x 1.5v AAA batteries
₹1,500.00 (Price is Exclusive of GST)Digital Non-Contact Infrared Forehead Thermometer Gun with Display
₹1,500.00 (Price is Exclusive of GST)Brass Nozzle with Connector for Mist Fog Spray in Sanitizer Dispenser or Tunnel
This is a brass nozzle with connector for Mist or Fog creation in Sanitizer Dispenser or tunnel. It can be used with alcohol based sanitizer liquid as well as normal liquid.
₹550.00 (Price is Exclusive of GST)Brass Nozzle with Connector for Mist Fog Spray in Sanitizer Dispenser or Tunnel
₹550.00 (Price is Exclusive of GST)Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
Features:
Automatic Sensing
8 Liter Tank Capacity
Mist Spray for better output
Easy to Install, just need to plug and use
6 Months Manufacture Warranty
Works under Sunlight₹3,500.00 (Price is Exclusive of GST)Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
₹3,500.00 (Price is Exclusive of GST)Auto Hand Sanitizer Dispenser Kit with Ultrasonic HCSR-04 Sensor Module, Relay, Pump, Power Supply and Jumper Wires – V2
- Best kit for making automatic hand sanitizer dispenser machine.
- Automatic Relay Controller Board
- Easy to use DIY Kit with IR Sensor Module and 9v DC Water Pump
- Use 12v, 2 Ampere Adapter for best result
₹990.00 (Price is Exclusive of GST)Auto Hand Sanitizer Dispenser Kit with Ultrasonic HCSR-04 Sensor Module, Relay, Pump, Power Supply and Jumper Wires – V2
₹990.00 (Price is Exclusive of GST)Auto Hand Sanitizer Dispenser Kit with IR sensor, Relay, Pump, Power Supply and Jumper Wires – V1
The kit Contains:
1 pc IR Sensor
1 pc IR Control Board with Relay port
1 Pc Mini Submersible Pump
1 Pc 12V Adaptor
40 pc Jumper Wire ( Female to Female)₹410.00 (Price is Exclusive of GST)Auto Hand Sanitizer Dispenser Kit with IR sensor, Relay, Pump, Power Supply and Jumper Wires – V1
₹410.00 (Price is Exclusive of GST)
