-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
₹255.00 -
Waveshare 12-bit I2C 16-Channel Servo Driver for micro: bit
Features of I2C 16-Channel Servo Driver:
- micro: bit edge connector, directly pluggable
- I2C controlled, using only 2 pins
- Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
- Integrates 5V regulator, up to 3A output current, can be powered from the battery through VIN terminal
- Standard servo interface supports commonly used servo such as SG90, MG90S, MG996R, etc.
- Reserved I2C control pins, allows working with other control boards
- Comes with development resources and manual (micro: bit graphical examples like Bluetooth/2.4G wireless remote control)
₹1,257.00 -
Waveshare 12-bit I2C 16-Channel Servo Driver for micro:bit
Waveshare 12-bit I2C
- Power supply: 5V (POWER connector)Â ORÂ 6V~12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3V
- Driver: PCA9685
- Control interface: I2C
- Dimension: 65mm x 36mm
- Mounting hole size: 3.0mm
₹1,040.00 -
Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
Features:
- Onboard touch controller, smoother touch experience than solutions that directly use AD pins for touching.
- SPI interface requires a few pins.
- Programmable backlight control, power saving.
- Comes with development resources and a manual (examples for STM32/AVR/PIC).
₹1,220.00 -
Waveshare 4 Inch Resistive HDMI LCD Display 480×800
Features:
- 4inch IPS screen, 480×800 hardware resolution.
- Resistive touch control.
- Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 Model B or Pi Zero, which requires an HDMI cable).
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie).
- Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
- HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
- 3.5mm audio jack, supports HDMI audio output.
- The backlight can be turned off to lower power consumption.
₹2,490.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
Load Cell Sensor 1Kg
- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
₹116.00 -
Weighing Load Cell Sensor 20kg
- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
₹90.00 -
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Wheatstone bridge formation of Load Cell:
HX711 (24 bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
₹222.00 -
WeMos d1 Mini pro – 16m Bytes External Antenna Connector esp8266 WiFi iot Board
- This is WEMOS D1 pro,it is a based on ESP-8266.
- New CP2104 USB-TO-UART IC.
- WIFI development board, 16M Bytes.
- Built-in ceramic antenna or external antenna.
- Same size as D1 mini, but more light.
₹665.00 -
WeMos d1 Mini- IOT ESP8266 Based Development Board
- Specification and Features :-
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input(3.2V max input)
- Micro USB connection
- Use BRT (Bias Resistor Transistor), easier into flash mode.
- 30% increase in radiating area, more stable.
- Dimensions : 35 x 26 x 8 (LxWxH) mm.
- Weight: 10 gm.
- Board Color : Blue
- Compatible with Arduino
- Compatible with NodeMCU
- Compatible with MicroPython
₹200.00 - Specification and Features :-
-
White Reed Switch Y213 2*14mm Normal Open
Features :
- Small Module.
- Very easy to use.
- Direct connection in the circuit.
₹16.79
